-
Posts
27668 -
Joined
-
Last visited
-
Days Won
377
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by meade916
-
-
-
Since the B and the 2 are both two different pieces and it is important to get the placement and angle just right, i cut a slightly oversized reverse template. Something i can put in place that will guide the bigger letters to the correct position. Then the template gets removed. The B2 logo is also bonded to the bracing with weld-on #3. You will see what i did MUCH better in the video i am working on. I hope to have it ready by tomorrow (the video, not the box). The box itself still has plenty of work to be done before i can fire it up.
- 1
-
Everyone keeps asking "where did the B2 Audio in the bracing go?"....i tell 'em don't worry it's gonna be there. But nobody gets it till i actually do it. This was planned all along. Mainly because the brace needed to be CNC cut while the logo needed to be laser cut (more detail in a beam vs. a router bit). I decided it would look best like this. I kinda like it
1/2 Clear acrylic with white 1/8" over the top of it. I offset the white a little because i think it looks better with some of the clear showing on the edges.
1/8" white acrylic
Bonded with Weld-on #3 like everything else
-
-
-
-
Again, you can't see it but where those are joined together, the acrylic solvent is crystal clear. It is a bond that is better than the actual material. It is more of a weld and less of a glue. In fact it isn't even glue at all. Just solvent. I did the bolts (1/4 x 20 x 1 1/2") because i wanted them in there but at this rate, they don't really need to be there. It was nice to suck the pieces together with them though instead of a clamp. This thing should look nutty when fully peeled!
Look real close...the seam is welded. It is one. And it came out clean! especially for a huge 1" slab. It is EASY to completely ruin this so i am happy it is going well so far.
- 2
-
-
-
-
-
-
-
-
-
-
Finally, about 5 years and 10’s of thousands of cnc made terminals sold, the real deal, factory made version is here! Very high quality injection molded body, TAPPED front landings (no “nut on a nut”) and a divider in the back to keep the wires from moving to close although with this design, that should never happen. It also has a built in gasket! Available now at most authorized dealers (most dont know about it yet).
- 1
-
-
-
On 1/21/2021 at 5:52 AM, Frankiebonez said:
Perfect drop. That car particularly has some ridiculous wheel gap from the factory. A much needed drop is what the doctor ordered.
i made a quick little youtube video on the build...deciding if i want to upload it now or wait a few hours....not sure. Wanna see and hear it? the turbo blow off is intoxicating haha
- 3
-
-
-
-
6 12’s for the caddy - 1” Clear Acrylic box CNC cut (sneak peak) check out the progress!
2015 Cadillac Escalade Sound System Install - 6 12's all 1" Acrylic box, mids/highs started update page 25
in Just Meade....my projects - Tons of SMD Builds here!
Posted