RooTxBeeR

Well I was thinking of that T400-4 but the MAX of the component set is 120, so I don't want to over do them, as for the Dual 2, no I meant if I should just get 2 P1000-d since it will be only around $100 more than a T1000-1bdCP and double the power, as for the FI-Q specs here they are. DUAL 1 | DUAL 2 Fs: 32.4 Hz | 32.1 Hz Re: 0.7 Ohms/coil | 1.4 Ohms/coil Qms: 8.52 | 8.61 Qes: .43 | .44 Qts: .41 | .42 Mms: 293g | 299g Cms: 0.82mm/N | 0.82mm/N Sd: 810cm^2 | 810cm^2 Vas: 75.6 l | 75.6 l Spl: 89.6dB 1W/1m | 89.4dB 1W/1m Bl: 13.9 N/A | 19.65 N/A Xmax: 28mm Rms: 1000W Sealed box: 2-2.6 cuft Ported box: 2.8-4 cuft @ 28-33Hz Sub OD: 15.625” Cut ID: 14.125” Mounting depth: 8.500” Displacement: 0.19cuft Quick Edit: The RMS is 1000, but as I have seen from Steve himself that the Fi's can handle pretty much anything you put into them, and would like to put a bit more than that.

Well while its decided which amps are "good", I have figured out what all the speakers I am going to get. Front Component, Rear 6x9's, and a FI-Q 15" Subwoofer. For powering those I will most likely go with the P200-2 for the front and the P400-2 for the rear, seeing as there are no amplifiers that meet the RMS of those speakers on prime. My next question is, I want at minimum 1000 Watts to the sub, thats at what ever ohms it will be, most likely 2 Ohms. I am willing to get the T1000-1bdCP for the Sub or maybe the T1500-1bdCP. If primes are good would it be better off to just get 2 R1000-1D's?

I figured I would need some second skin or dynamate because I would be upgrading to a high powered subwoofer. Any thought about my 6x9 question, and do you mean the prime high as to the component set I was talking about or a Prime amp for the highs. Also It will only be 2-3 Amps at most, should I get another alternator, and about batteries just get a new one for inside the vehicle and put them all to it, or do you think if I get a good battery for my whole car it would run it all well.

I was looking to get a whole new system, right now I just have a ok Kenwood system with 2 10" JBL's off of a MTX 2 channel amp. Kenwood head unit with 2 6.5 coaxials in the front and 2 kenwood 6x9's in the back. I want to get a completely new system, Yes price is a thing here but I am willing to spend some cash if it is really worth it. I did some digging around on the forum, and saw some people saying SQ is more than what most people realize. I am going to just put out what I had in mind of a set up, but if you think there is something that would replace what I had in mind, and in the price range of that object, please feel free to speak. First and formost, I have a 91 Civic Hatchback, so for bass, I don't need much to get my car moving, my 2 10's can get my roof rattling with only 200 watts to each. Here it goes. Front: Was looking into RF 2 way component set Linky! Rear: RF 6x9 Linky! For this thought I was wondering, the kenwood 6x9's I have, are of their High end line, if their really is one comparing it to high end speakers. They were $150 and these RF 6x9's are only $20 less, also would there be any difference if I were to get the 2way to 4 way. Sub: Since I have a small car I don't need much. Was looking into a FI-Q 15". Power: I was most likely going to get Prime or Punch series RF to RMS all my Mids and Highs. As for the Sub, I am stumbled if I should cough up the money for a nice RF Mono amp and rms at 1000 watts, or pay less for something like a power acoustic and put it 1500-2000 watts off one of them. Please any thought and Ideas on how to make this set up good would help, and I am looking more into quality, looking for it to be bassy, but not have the bass overcome the highs and mids. And this is going to be a everyday use.