Jmoney2544

wow thats crazy. i think ill go with the AQ's

http://lmgtfy.com/?q=Dc+level+4+port+area thats why

How Much Port Area Per Cube Is Best For These Subs?

I see these combos everywhere. Im new to DC Audio and would like to know what this exactly means? can it handle more power? i wanted to get a level 4 15 but i might be putting more power to it in the future... could it handle 2k?

im still confused. fuse holder by batt or amp? (on the aq2200d) as per my above post, fuse it at the battery. as close as possible, 2 or 3 inches if you can manage it. and do i fuse it at the amp to?

im still confused. fuse holder by batt or amp? (on the aq2200d) or both

Does This Battery Diagram Look Alright? Going To Start Building Soon. If anythings wrong please tell me, thanks!

Does This Box Design look Good because I'm going to start building it soon. Its for 2 AQ HDC3-15's (7 Cubes @ 36 HZ)

i was gonna use this wire from front battery to back battery and it needs to be fused on each side. it says it supports up to 375 amps at 20 feet so should i put a 375 amp fuse on it?

Do i need a fuse from + alt to + Battery? if so what amp fuse? using Stinger HPM 1/0 and stock alt is 135 amp

true. them aq subs are stiff. i could barely move the cone of my hdc3 12 when i had it. the amps are to die for lol. why not 4 sa12's? how much they go for?

you think the 12's are not as loud?

that was a whole new setup on Crescendo 3kwp. no harm in making new threads. just more info on the internet buddy...

you think the 4 12's are not as loud?

What setup do you think i should get that best fits my likings and efficiency? I like Low, Loud, Hard Hitting Bass. I listen to mostly rap, and a little dupstep Im either getting 1 of the 2 setups listed below... (4) SDC2.5 12" In 1.8 Cubes Per Sub On (2) AQ1200D's Daisy Chained @ 2 ohms (12's go from 1.8-2.5 Cubes) or (2) HDC3 15" In 3.5 Cubes Per Sub On (1) AQ2200D @ 1 Ohm (15's go from 3-4.5 Cubes) Whats setup fits my needs the best?

I Heard the Xs D3100 Can Provide up to 4-5k watts as a secondary battery. Ill be running a little under 3800 watts. i will have a optima redtop up front and a d3100 in the back. If this enough? Stock alt Knu OFC 1/0 Big 3 w/ Stinger HPM

how much to 44143

nope, u guys are probley tired of all my asking. thanks everyone

thanks for the input!

Where do you think i got it? And its still too big. IB4 thats what she said x2 Still?!? Its not much bigger than yours lol..oh wait, i did it again haha thanks for the input!

i dont have an oscope and even if i did i wouldnt know how to do it. i have a great local carshop near me would they use an oscope and set them right?

what do u mean some songs come clipped? like clip at 5 volume with the knob at 1/4?

Q1: Example: You set your gain remote to 3/4 and set volume to like 45/62 and KEEP IT There. in the middle of the song depending on how hard the bass hits does the clipping light go on and off? Q2: I know flickering isnt a problem but solid light is. will there be times where its solid for like 3-4 seconds then no light, then solid for 3-4 seconds, then no light again? Q2: when people say dont keep the solid red light on for long periods of time, like how long do you mean?

when u guys mean ,long periods of time like what? 5 mins 30 mins?

what does this clipping light have different modes or something like dim and bright solid and flickering?