[wall off in civic 4 dr help?]

OP back to the beginning here before throwing out what to buy and shit how are your wood working skills ??

[wall off in civic 4 dr help?]

to lose breath is like mid 150s or higher imo.

ive never experienced 150s or anything near it, but from what i read/gather its usually around a 157 that does it.

also your looking at like 2-4 subs, not just 1.

something like 2-3 dc level 5 18s

or 4 xl m2 15s..

but something around like 10k+ watts.

sundowns Z series is quite nice, no idea on the incriminator audio situation though as they arent often used on this site

where are you pulling your numbers from??

you dont need a 10k watt system a well

i had less then 5k rms to 4 15s and was doing a 153 at 29hz and it took your breath away, hell it almost made my buddy shit himself like straight up he had run inside go shit....

and before that i had 2 15s on 2 alpine 1000 watters and was up in the 150s was at 42hz but still did some damage

since he said hes not doing comps, i would assume hes not going to drive around shooting tones....

if i remember correctly, getting louder on music is much harder than on tones..

i wasn't doing comps either i had a daily music machine tuned at 27hz and i could bassrace a 150+ at 30 hz.... thats not music?

[wall off in civic 4 dr help?]

to lose breath is like mid 150s or higher imo.

ive never experienced 150s or anything near it, but from what i read/gather its usually around a 157 that does it.

also your looking at like 2-4 subs, not just 1.

something like 2-3 dc level 5 18s

or 4 xl m2 15s..

but something around like 10k+ watts.

sundowns Z series is quite nice, no idea on the incriminator audio situation though as they arent often used on this site

where are you pulling your numbers from??

you dont need a 10k watt system a well

i had less then 5k rms to 4 15s and was doing a 153 at 29hz and it took your breath away, hell it almost made my buddy shit himself like straight up he had run inside go shit....

and before that i had 2 15s on 2 alpine 1000 watters and was up in the 150s was at 42hz but still did some damage

[wall off in civic 4 dr help?]

those warden subs are monsters haha 1 21" would get nasty loud on right power

[Getting spray paint off glass?]

go to dollar store and pick up one of these

[A Mustang, 4 8"s, and 4k]

that box looks a lot better then the last

[LOL, i'm such a NOOB.]

I've never seen 6 AWG cable before.

well, don't buy walmart wire and you never will. lol

walmart wire is speaker wire when in a bind haha

[DIE ANTWOORD Makes you go WTF did I just watch again]

haha fucked up video as always but for some reason i've always liked there music

[external port length]

lol this thread is full of laughs haha

if you plan on fiber glassing in side of box then half inch is good

but with those dimensions your working with your pretty screwed unless you've got more to work with and just didnt say yet

like to me if your able to externally mount 2 2" pipes 31.5" out of a box i'd thing you have some room to work with... nom sayin

[spring break nationals 2012 bass demo 10 15's..f'in loud]

ya feel me...lot of time went into this...but its well worth it

Yeah and money when you cant install an air freshener you gotta get it somehow.

was thinking same thing to myself....

Woot taking credit for other peoples hard work YA!

[Aero ports in a wall.]

would cost couple hundred dollars in just aeros alone to come up with the port area needed at times

example haha

[Over lapping ads]

works fine for me and im on firefox.... was having problems with site little while ago not being able to reply but thats due to un-updated software

[What is your box tuned to?]

i know with my old wall i was tuned to 27 hz and it was nasty nasty on the lows

as for the highs it played in the 40s fine not as loud but still did some shit but i think thats just due to the fact that i had 4 15s behind head

cone area made up for tuning

[Amateur Box painter (Need help)]

if you have normal drill bit you can do it to simple take some tape wrap it around bit where you want to stop the the bit from going any farther into wood and just drill up to there takes some time but you can get good results by doing this

[Crazy idea...]

what the f you talking about?

[Metal tape as a temporary trunk seal?]

ghetto as hell but it sealed it haha

haha shit couple years back at a show buddy just built a 4rth order and it wasn't sealed properly at all and so 2 rolls of ductape later we got the whole box covered in it and ugly as shit but it gained him splzzz

[Amateur Box painter (Need help)]

sounds about right, be careful counter sinking your screws, you know how mdf is..

explain yourself

[Amateur Box painter (Need help)]

also been wondering what kind of paint is best to use?

where i will be painting i would rather not have to rattle can it i was wanting to roll on paint inside port

[Metal tape as a temporary trunk seal?]

i've never been one to really fuck with making shit permanent as i change shit often and sealed off with tape and it helped but not good enough

box in lumina

haha metal tape does do good job of sealing, just if its not sealing large gaps

[THANK YOU RAY AND KINGSUV!!!!!!]

Not too much of a box to look at. No fancy plexi or carpet. Just a good ol 3:1 BP with 2 4" ports. peaks at 28hz

Mhmm 3:1

[Building my second box this weekend...]

i really dont like you using liquid nails... ive had problems with it in the past coming apart on me...wood glue works fine..but what i use is ---> http://www.lowes.com/pd_44917-65911-F26-34_4294729391_4294937087_?productId=1087179&Ns=p_product_rating%7C1&pl=1&currentURL=%2Fpl_Glues%2BTapes_4294729391_4294937087_%3FNs%3Dp_product_rating%7C1&facetInfo=

AMI customs turned me onto it.. alot easier to apply and every bit as strong as wood glue

i use PL400 to adhere stuff in my box's now and it is simple to use just a caulkin gun and big ol tube pl and slap that shit on and give er shit

simple simple

and you was asking about terminals this is how i do bolt terminals

[Building my second box this weekend...]

if you take your time and build the box properly you should not have to worry about using caulk to seal it

take the time sand all your mdf before you put on generous coat of wood glue screw er in wait for glue to dry and done

there was good post/thread long ago by huge-erection haha bout mfd prep

[Strap amps or run independently?]

some people have told me that unstrapped they gained

but i have yet to see any proof

some have also said strapping them gained-

there is many variables when it comes to things like this

[Kranny's New Computer]

so all that fancy mumbo jumbo just means you can look at porn faster eh

[UPS?! Oh wait....]

glad we dont have ups.....

you really are lucky to not have them

the stupid fuck heads took me to collections over 70$ ( border duty fee) that i paid, At the ups store where i was suppose to pick up package but they sent out so ended up wasting 2 days waiting... just to have them loose receipt