As-21

I got the old 1005E it doesn't have a digital screen on it.

Thanks for the replay. I have a problem i think with charging the d5100. The charging LED flashes. It turn on and off. I read 10.8 volts on it when its disconcted.

I just got the IntelliCHArGer 1005E from my friend to refresh my XS Power batteries. I got 6500 3100 and 5100. When i charged the D6500 by it self i noticed that it skipped the stage 1 of the charging and went to stage 2. I could see that because i set the charge rate to 15A and the meter on the IntelliCHArGer when up to 15A and went down 2 sec after to a bit above 0AMP . Is it OK ? Also i want to know on how much charge rate should i charge this batteries got 5A 15A 20A ? I set it to 15A for now.

so when is the level 5 Ts parameters will be released ?

here is the grey color on the coil its about inch width and 2 or 3 lanes of the coil very straight and square shape: what you guys think ? where this coming from ?

i installed the sub inverted and played again on the area that i hear the noise the loudest i can see a straight Square shaped of gray paint on the voice coil i couldn't take a picture off it because i can see it only when i play a track. it is where one of the leads going to the coil not the same lead as before its different lead is it out of align ? is it hard to fix that kind of problem ?

this is a video you can hear what i am talking about: the buzzing sound isn't from a bad recording that what i hear when the subs operates http://youtu.be/IcCz63rBEpI also i noticed that the cone and spider connecting place on one side of the sub is dry or failed apart could it be the reason ? here is a picture of the dry side: and here the other side for compression: this picture is for the leads mark couldn't get clear picture off it.

this are the specs 1.5 cuft net. 16 inch^2 per cubic feet tuned to 34hz, here is the Google sketch file if it helps. http://speedy.sh/VwDKw/LVL5-DRFAT-1.skp just click on download above. ill try to upload a video so you guys can hear it too, this is my setup: Hertz HSK 165XL Celestra FA475x DC Audio 3.5K DC Audio level 5 12 inch XS Power 6500 on the front. XS Power 3100 on the back. Knukonceptz 0 gauge an 10 gauge OFC wire. 110 AMP alternator

i noticed today that my sub making a rattling sound and hit noise when i crack the volume up. i didn't touched the gain for a while and the noises come when i am on high volume. it wast like this before i must say. so i took the sub from the box to see i i can hear from where this noise is coming. didn't hear nothing special i noticed that one of the leads is kinda touching the cone and there is leads marks on the cone. when i play the sub all volume up on free air i don't hear hitting sound only low rattling sound when i put it back i can hear something hitting or hitting sound and rattling on a bit low volume. Ive also checked the cooling hole on the bottom if there is a FOD in it didn't find nothing and the sub looks aligned. what can it be ? is it possible the spider lost there stiffness and i am hitting now the XMAS ? Or is it the box fault ? too much port area ? or the port area is too little ?

DC 3.5k and 5k shipped to 07205

What about international customers ?

I used to ride . Thanks to all i did only a half because i went out of stickers took me at least 4 hour to do this but its worth it. Hit me up with nice dc audio sticker i don't have one

What you guys think ?

I want to get bigger and louder form the ported box i got. I got 1.5 cuft after displacement 16^2 per cubic feet tuned to 34Hz. I want to build a louder daily box then what i got. What are the specs i got to do for 4th order ? is it recommended to a sub like i got ? I got 5.6 cuft for the new box.

Btw Rusty when you gonna poblish t/s info for the level 5. Also i want to build a 4th order box for my sub what you recommend?

Ive finished my install on my car finally on the first day of 2013. Here is quick overview over what i got in the car for now. Hertz HSK 165XL Celestra FA475x And .... DC Audio 3.5K DC Audio level 5 12 inch on 1.5 cubic feet net box . XS Power 6500 on the front. XS Power 3100 on the back. 2 runs off 0 gauge OFC wire. This a picture of the install my car is a Seat Ibiza 2011 SC most of you wont be familiar with this car because its not sold on the US and i don't live in the US (Israel). I got still some more space for bigger box. I want to try to build a 4th order for this box a few months from now. This is the score i got for now on quarter of the gain didnt do a sound deadning yet on the back and i am on a stock alternator for now (110AMP). And thanks to DC Audio for the good start of the new year

Thank you all ! But there is still one qustion didnt got answer for it. What is port area per foot i must do ?

Thanks CJ ! your comment much aprecited !. I will run it on 1 ohm 3,500W. I understand that i case of lack of power from the electricity people overcome that by increasing the box volume. What port area per foot u guys recommend that ill aim for or what is the range that can do with the Level 5 ? Also i thought to build the box from Birch Plywood what u guys think about that ?

Thanks ! saw your old vid with the level 5 and 3.5k, your comment much aprecited !. Ill sit on the design again and comeback with the results. Basically want to build ported box for my level 5 m2 12 inch, that tuned to 33HZ when the sub and port are upward. my max dimensions are: Height 21 Width 35 Depth 18. I want to save trunk space and build the sub as little on the bottom surface and more to the height kinda. My problems is how much net volume and port area i need to aim for and what else i need to pay attention. I am listening all kinds of music rap dubstep ruck metal classic rock and classic music too. Here is my setup: Level 5 m2 12inch DC audio 3.5k 2 xs power batteries 5100 and 3100 on the back 110AMP alternator for now. Do to my lack off high output alternator and kinda poor electricity what you guys think the box should be. Ohh and i gonna run 2 1/0 guage from front to the back. Maby ill put much bigger battery on the front if there will be place for it. Also my car is small 3 doors hot htach Seat Ibiza Sc 2011 i know that there is no Seat brand on the us but is a VW brand basically. Ive asked Mechman about alternator for my car its kinda tricky because the car doesn't exist on the US and the big question is will VW Golf or Passt alternators will fit on it, I hope my bad English didnt cofused you guys.

This is first design what you guys think ?

Here is my setup: Level 5 m2 12inch DC audio 3.5k 2 xs power batteries 5100 and 3100 on the back 110AMP alternator for now what is the recommended box volume do i need to do for my setup ? and how much port area you think i need ? I will design it on Torres' Box Tuning Calculator so if u can give me what to look after when i will build it and what measurements like Net volume port area and other thing ill need to have.

Really liked it I just love small subs on the trunk got the idea from you thors I am planing to add another level 5 and 3.5k in the future.

As i mentioned before i am from Israel.

I am living in Israel and yesterday i finally got my level 5 m2 12 inch. When i saw this at first i was shocked to see the motor this monster got. I knew it will be big but not that big and its so damn heavy . Here some sexy pictures of it: Thanks Dc Audio cant wait to build a box for the monster.

waiting for Level 5 specs . 10x for the update.