sohczc

360 is now a thing of the past, the graphics are know where close and if you think the 360 is better than you need to quit playing on a 13" BW TV and the online you dont need a credit card because it is free so there is know debate on do I want to buy a 18 RE or do I want to play NBA live. And the titles are coming so 360 watch out.

Hey guys how are you all doing. Have you guys played this thing I picked up the 60GB and I have the HDMI cable hooked up to a 32" LCD HD TV. Let me tell you, The 360 ain't I repeat ain't got nothing on the PS3.

What kind of Deck is it, I had a problem once with a 9000 series pioneer and it turned out to be a bad output on the deck the company I bought it from swapped it for me and it stopped. That my opinion.

Hey guys How is it going I had a question I finally got a hold of a RF Symmetry EPX2 with the 28 band EQ card> I was wondering what should I set my balanced line driver at to run to the eq from the deck. My deck is an Eclipse 8455 with the 8 volt preout. Thank You in advance for any help.

What kind of router bit do you guys use for cutting circles with your jasper 200 circle cutter.

Hey guys hope you are having a good holiday, But on another note I started my fiberglass enclosure. I did my skeleton and my fleece and then my first layer of fiberglass so I started to sand down the high spots after the resin dried and I'm sanding the fiberglass and I didn't have a shirt on and as I'm sanding I'm thinking to myself I thought the guys said this stuff Itched and I continued sanding. About an hour latter it felt like I had little razor blades in my skin :ranting2:. So lesson learned never do fiberglass without the proper clothing. Just a Holiday laugh for you guys at Steve Meade Designs and have a safe New Years.

I'm looking for a Symmetry System in good condition if anyone has one they want get rid of with a 28 band card. Thank You in advance.

David that mat you told me to use the Knytex Pro-Mat if I cut it up to do the lay up will it change it's properties or make it weaker in any way because I'm going to be using it as a lay up on top of the fleece and I have a pretty nasty sub so I need it to be as strong as possible.

I want to use the mat to build the enclosure thicker for more strength because the fleece is not thick enough to make the enclosure strong so what weight do I want to use.

Hey guys which resin do I want to use to do a custom fiberglass enclosure first one so I don't know which to use Epoxy Resins or Polyester Resins. And which weight of fiberglass mat do I want to use for my buildup. Please reply

How would I make go down to 32htz?

Here's what I'm working with. 2002 Kia Sedona Head unit Eclipse 8455pro High's and Mid's Image dynamic horns and Kicker SSMB8 midbass in the doors Sub is 15" Eclipse Titanium Pro in a 2.5 cubic foot sealed box. High's and Mid's amp is a Zapco C2K 2.5 Sub Amp Is a Zapco C2K 9.0

How about 35htz.

Hey guys, Hows everything going. I have a question what is the best enclosure for sound quality. Need help and Thank You in advance.

I was looking at them but the rating of the batcaps power is not that high and the biggest one they make is to expensive and the stinger specs on the Sp1700 is pretty impresive.

Hay guys do you think a 240amp alternator and a stinger Sp1700 would be enough for the Zapco C2K 9.0 and the C2K 2.5 with the big 3 done already or would I need more. Need feedback and Thanks

:^ I wanted to thank you guys, I spoke to the guy at Iraggi and he has a 240amp for like $450 that is great and it is bolt in that is more than enough power for what I am doing .

:^ :'( Very Sorry about that Mr .Meade. Just wanted to say your work is unreal and that is some sick stuff. Keep it coming.

I'm not joking I have no room I really need something that uses the factory casing or something equal. To take the alt out is a 4 hour job at the dealer by the time book. 0 clearance.

No sorry the smilely goes to my problem. Sorry guys. I'm not really good with the posting

I'm new to the site just wanted to give you a thumbs up :^ I looking to get a highout alternator for a very difficult vehicle I have a 2002 Kia Sedona it has a factory 120amp alternator and I'm running a Zapco C2k 2.5 and C2k 9.0 I have 00 gauge wire and know caps yet and the battery is stock , but I'm getting 2 stinger SP1700 and a couple of bat caps. Ohio generator said they would build me one for $500, but that was for a 180amp thats only a 60amp upgrade and $500 that alot for 60 amps I want something at least 200amps or more and space is very tight under the hood and the factory alternator is in a @%!#y location in between the P/s and the A/c . Please help and Thank You.

:-[ I was thinking about ported but I'm worried that it will be to loud and boomy I like to know the difference in my instrument and impact, how the bass sounds, Rate now it sounds great in 2.5cuft including displacement of the magnet and for it to be ported it requires 4.7cuft and some ungodly port size I can't recall rate now .It is a rediculous sub RMS is 3000 Peak is 5000 and weighs about 70LBS it is a quad voice coil setup 4 1ohm coils I will post some more specs later. Please Help and Thank You.

Hello just want to say great site! I'm new to this site and this is what I'm working with. 2002 Kia Sedona Head unit Eclipse 8455pro High's and Mid's Image dynamic horns and Kicker SSMB8 midbass in the doors Sub is 15" Eclipse Titanium Pro in a 2.5 cubic foot sealed box. High's and Mid's amp is a Zapco C2K 2.5 Sub Amp Is a Zapco C2K 9.0 I'm looking for a Rockford Fosgate Symatry Epx to do my crossover and Eqing My van is very dead 120sq of dynamt will do that. My wire is stinger and stinger connects and everything is soldered. I'm looking to rebuild my sub enclosure and go to fiberglass I'm going to do something different Do you guys have any feed back as to a better size for the sub to operate in or possibly a ported box the sub drops really low now, But any feed back will be appreciated. Thank You in advance for the help.