Jump to content

sprkn_ranger

Members
  • Posts

    3680
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by sprkn_ranger

  1. i made my own circle jig out of 1/4" mdf i had laying around. cheap and easy. just make sure you have some scrap mdf to test your holes with. id recommend a 1/2" upspiral cut bit, 1/4" will work too but is more likely to flex under load.

    Hey do you wax your circle jig before using it? I have always done this with home made jigs but wanted others opinions on this. And to the op, it's easy to make your own just make sure your measurements are accurate.

  2. I know that FI is located in Las Vegas, which isn't too far from me. If I were to order 4 18" BTL's could I arrange for local pickup so I can save on shipping costs and hassles? Does the pricing On the website reflect shipping? Or is it added when you check out? Thanks for the info!

  3. I'm not sure if I read it right but a few posts up you said that you have to put the charger on it before you can use it? Just a suggestion but you might want to check the electrical for shorts cause I know from experience (I'm a heavy equipment operator) that wires often short out on equipment from normal wear and tear. I'm not an expert on battery's or anything but I think I remember hearing it's bad for the battery to be charged then completely depleted, as well as being stored for periods of time depleted. Hope all works out for ya!

×
×
  • Create New...