727Designs
-
Posts
1633 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by 727Designs
-
-
Message me and I'll add you to a facebook group where you can stay posted on them.
-
Waiting on someone to post that silver BMW thats stickied in the members ride section. Definitely up the list.
-
Repack it, bet the stock packing is probably about toast. A fresh repack will likely be the biggest difference you'll see until you go aftermarket. I wouldnt waste my time shortening or anything else.
-
if you ask me, the "hate Lebron" bandwagon is worse then the "love lebron" bandwagon LOL. Nobody can deny how good the guy is. The team is good too of course LOL
Oh I won't deny he's an awesome player, just always rubbed me the wrong way. Definitely one hell of an athlete.
-
Heat! And no I'm not a bandwagon fan, just a D. Wade fan from way back when. Heck, I even hate Lebron. LOL
-
I've kicked in many a door from people not paying attention, or cutting me off on purpose. He opened the door on me I would have probably went apeshit.
-
I can't look at the pics here at work but going by the description it's an M3 Mojo. Introduced right after they switcvhed from the 4 spoke basket Mojo's. Memphis referred to them as an M3 Mojo but most people just called them the M3's (There was a regular M3 also, but motor size alone can tell them apart). Still a decent sub, but not on the level of the older Mojo IMO.
Edited to clear up something that may have looked confusing. Not all M3's where Mojo's, but I've seen several people refer to M3 Mojo's as just M3's.
-
-
Still not 100% sealed off, but doing alright I suppose. First hairtrick with the new setup:
4 DAD KMH 15's, DD Z1 @ .5
-
I have seriously considered making an aluminum heat shield with some heat tape on the inside to go under mine and cover the side the heat would come from. Haven't went through with it yet, just more or less kicking around the idea and wanting feedback. Tuned in to see what the experts say for you here.
-
How to start building? At the floor.
How to start on a 4th order? Research.
-
Finding a used caliper on eBay would be the best bet. OEM stuff is $$$$
-
Which "Block off plate" are you referring to? Like lifted said, if it's an ebrake blockoff plate thats leaking from you have a bad seal somewhere inside.
-
Mine wasn't bad at all... Until my passenger side mirror glass fell out when demo'ing for my buddy. Made changing lanes and backing up a bit of pain. I make sure I park somewhere where I either won't have to back up, or where there is no way anything can come up from my passenger side. Once I get another mirror it won't be an issue anymore. I have always drove with my mirrors though, if you're one who turns around to back up it may take some getting used to.
-
look up gary kilsman crossfire hes got a diamond, idk if that what your talking about tho
Gary Killian.
-
It would probably be alright, but to cut down on the chance of looking like I have crabs in public thanks to some itchy boxers I always wash them separately.
-
Well I've already tried with a separate wire that I know isn't broken and wired it from the remote to the amp and nothing there. Nothing from the red either...
I did, before I installed the remote wire, it was being used to turn on the amp, but it was ghetto-rigged and hooked up t the battery in the back instead of the HU. Before this instal the remote turned on the bazooka tube just fine.Have you checked for power at the back of the HU to make sure it's not just the remote wire broken somewhere in between?
I'll get pics up later of me trying to diagnose the problem :/
Doesn't mean that sometime during the swap it didn't get broken in two, or come loose from somewhere. I seriously doubt the remote out on the HU just quit working.
If you don't have power on the red (ACC) wire then your head unit isn't going to cut on.
-
I did, before I installed the remote wire, it was being used to turn on the amp, but it was ghetto-rigged and hooked up t the battery in the back instead of the HU. Before this instal the remote turned on the bazooka tube just fine.Have you checked for power at the back of the HU to make sure it's not just the remote wire broken somewhere in between?
I'll get pics up later of me trying to diagnose the problem :/
Doesn't mean that sometime during the swap it didn't get broken in two, or come loose from somewhere. I seriously doubt the remote out on the HU just quit working.
-
Have you checked for power at the back of the HU to make sure it's not just the remote wire broken somewhere in between?
-
Needs more port area honestly.
-
if you want to keep the same box, and if its a box problem, put 10" sono tubes behind every sub that are at least as long as the sub is deep. im not sure what length would be best though. that will help even out the pressure behind each sub.
^this. Cross directional loading was my first guess.
-
3/4 static looks good on these trucks. I'm in lexington bout the middle of nc it'll def be hittin up some shows when it done
I put on SPL comps in the FAR northeast GA (10 minutes from the NC line) area pretty often if you'd be interested in attending I can get you some info on the shows. I'm sure I'll see you at some of the NC shows as well.
-
his name is, Will ive pulled a few of those all nighters with this truck. lol, seems like it happens ever time i mess with it
I can't remember right off, didn't catch many names we had so many people piling in and out of the truck. Lol story of my life with this truck, I started the build with plenty of time then ended up having to put it off, found out Tuesday that Mini Nats was Saturday. Subs were coming in Friday and all I had was the back and bottom of the wall done. It was pretty rough but gets loud. Metered it Saturday night basically untouched from Mini Nats (havent even charged the batteries) and pulled a 150.75 on music sealed up after demo'ing a few songs.
Your truck looks awesome, I had seriously considered going hydros on mine but after talking to my buddy Kurt (with the single cab S10 that was 3 wheeling) with all the weight and how everything is bolted to the body and everything it would probably end up being a pain in the long run and my truck is built for sound first and foremost anyway. Going to do a 3/4 static (+ what the added weight has already dropped it) and be done with it. Can't wait to see your truck around at some shows, where in NC are you exactly?
-
yea saw ur truck think my little bro talked to u
Possibly so, had a nice crowd gathered around when I was demo'ing. What was his name? My truck was looking pretty rough that day, literally finished the wall up and stuff the noodles around it to half ass seal it off at 2am Saturday morning, went to work at 8, then left straight from work to head up there.
1500 Rms Subs, Small Enclosure
in Subwoofers / Enclosures
Posted
Inverting the sub if you have room will help get away without dealing with sub displacement. I've seen Sundown Z's work in smaller boxes, can't remember exactly how small right off.