Mha
-
Posts
375 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Mha
-
-
How much time do I have? I nees a 3rd.
-
I get the spray on wax at the car wash. Is it anygood?
-
I do have a mechman 270 and a d3400 under the hood with the oem battery and 2 xp3000 in the back and im not droping under 14 volts with a dc 5k so you should be good.
I do have a question though. Would adding a 3rd xp3000 be to much for my mechman 270? Im not dropping under 14volts but would like my voltage not to move at all.
-
My 4channels only running 2 channels and only one half of the amp gets hot
-
How good is that hifonics amp? I have a hifonics zxi150.4 wich is good but since they no longer make it I cant find an other to match. It heats up bad too but has never turned off on me. Well maybe its the fact that my soundstream comp are 3ohm and im running it at 1.5 per channel. I like it though. Would you recomend it? Does it do anything close to rate? It seams way to small for the power it says it puts out.
-
The whole battery bank is now conected and on tge ctek battery charger
-
I have ground and power running to my 2 xp3000 in the back, well today I pluged in my ctek charger wich I leave the terminal hook on to the battery and it would read as on but it would not charge. Turns out my ground on a battery was not conected. I have the batterys conected pos from front battery to pos to pos in the rear and neg from front to only one of my back batterys. Im running a dc 5k with 2 pos and 1 ground the other was not conected but it ran. I dont even know how long is the bad thing . So if ony a pos of a battery is conected to the rest of the bank will it work? Did I do any damage to the batterys or my amp?
-
So as long as there clean? I dont have to polish them? Is letting them air dry ok? Well other then the nasty lookin water marks theyll be ok right
-
I have had my chrome rims for less then a year and there starting to peel. Not bad but I think its time to learn to clean them. Dont want my money to go down the drain. Anyways I know about washing cleaning drying and polishing but its to much. Well the polishing anyways. That part takes for ever and there only nice for a few day. Can I get away with just washing and letting them air dry once a week without them peeling anymore? i dont need them to be mirror like everyday just presentable. Is there any faster ways to polish them. I use a past that dryes on and then you whipe off that.leaves them mirror like but its not worth it to me for a few days only. O do the watter marks that remain on the wheel when you air dry do harm? Thanks.
-
Tell me about it. I see videos on you tube of people dropping to 12volts for 14+ and.hear im only dropping half of a volt from 14.8 to 14.2. But wana know what F'in sucks for me my alts a pcm controlled so after a few minutes it drops to to 13volts on its own. And my .5 volt drop becomes 12.5 F my life. Still need to install my mla module hope that fixes my problems.
-
This is at idle I dont have a meter so I cant tell what im getting when running
-
I get a .5-.8 drop out of a mechman 270 and 2xp3000 a d3400 and a stock battery. On a dc 5k at wired at .7ohm ( havnt clamped) and a highs amp.
-
Im subed to sonicelectronixs on my youtube and just this week the showed a new line of jbl amps that have a built in gain adjuster. How good it works I dont know
-
Im a get one just for looks not cause I need it
-
I like um. Im.thinking the chrome on my dcxl 15 with the inverted dust cap. Maybe get a jl w7 logo on my xl and say it a special addition w7. Joke. DC all the way
-
How come.audiosavings and sonix and many others doent carry soundstrean anymore?
-
Any chance of one for the newer gm pcm alts?
-
175.4 & 5k to 68840 thanks
-
Shes hot
to me its like lil wayne. I dont like there music but lyricaly there up there on top. But I stay away. -
I also just got my ctek 7002 this week. I have not let it full charge my bank just had it on for maybe an hour to see where I was at, 3rd light. Im charging a d3400 and a stock under the hood and 2 xp3000 in back. Im a charge tomarrow but I dont gave a dmm to check where they rest or the charge rate. Are they expensive? Can a cheap one from wallmart? Im conserened now.
-
What charge state did you let it reach on the charger? The final stage?
-
About subs getting warm, I have an xl 15m2 wried to .7ohm on a dc 5k Bass knob on 0 most of the time
. Any ways my dust caps an inverted tfs cap and it gets warm but how warm is to warm? Does that dust cap help or hurt it in any way? No smell that I know of.Sub sure did seam to break in quick
a few days it seams like. Thank o the 5k -
$30? I thought they were over 50 d@mn
-
I bought some stinger 3/0 wire reducers for like 22 for 2 on ebay, they have more. And ran 2 0 gauge wires into the reducer and it fit had to trim some strands thou. But a lot cheaper
.gif){kind=small}
to me its like lil wayne. I dont like there music but lyricaly there up there on top. But I stay away.
DC Level Sex M2s WWHHAATTT???
in DC Sound Lab - Big Bass on ANOTHER LEVEL!
Posted
Will they start production anytime soon?