Jump to content


  • Posts

  • Joined

  • Last visited

About Jeep727

Profile Information

  • Gender

Jeep727's Achievements


Newbie (1/14)



  1. First I sanded the entire box with 150 grit, then used basic Krylon gray primer as a base coat, and finished with a textured, canned paint called 'Make it Stone' iirc. Pics of the jeep on the way.
  2. Hey, I dont know if this box build warrants a thread here, but I thought someone may be interested in seeing my system's progress. Unfortunately, this is probably the last of my additions to the system for a few years because I will be away starting a Biomedical Engineering degree this fall. All cuts were done with a circular saw. Sorry for the lack of pictures but at any rate, here they are: What my garage turned into: That's it for now. Vids later.
  3. I have two nice 12's you may be interested in. Link: http://www.caraudioclassifieds.org/forum/12-subwoofers/108789-**********beefy-cadence-zrs-12s-sale**********.html
  4. I have two cadence zrs 12's you may be interested in. They were built in the same factory as AQ subs and are pretty beefy. I can work up a price for you if you're interested. PM me if interested. Thanks!
  5. Hey Meade, I just placed an order and I was wondering if you could sign my DD-1. My first name is Thomas and my address is in St. Petersburg, FL. Thanks!
  6. 2 Sundown SA-15's. Maybe some DC Level 4 15's if you can find em' used.
  7. You can use Google Sketch Up (free program) and the thread on here lniked below if you want to take a try to design it yourself. I just finished designing one for myself and it took me maybe an hour at max. Link: http://www.stevemeadedesigns.com/board/topic/1828-quarter-wave-t-line-tutorial-updated/
  8. I have a crescendo 1000c4 and I am impressed with it. It does rated and sounds good. It does get kind of warm but I don't have a scope and may be clipping some.
  9. I just bought a used Rockford P1000-1bd for 190 locally. The birthsheet shows it produces 1366rms at 1 ohm. You will find good deals if you search around a little.
  10. Yep, I have a hard top and I always have my doors locked, which helps keep things safe.
  11. People generally run 12-16 square inches per cube for a slot port and 9-13 inches per cube for flared ports. However, I am running one 10" sub in a box with 19.5 inches per cube and it sounds good. If you choose to run a large port are like I am, mount the sub far away from the internal port opening to prevent any unloading possibilities.
  12. Thiele/Small (t/s) commonly refers to a set of electromechanical parameters that define the specified low frequency performance of a loudspeaker driver. These parameters are published in specification sheets by driver manufacturers so that designers have a guide in selecting off-the-shelf drivers for loudspeaker designs. Many of the parameters are strictly defined only at the resonant frequency, but the approach is generally applicable in the frequency range where the diaphragm motion is largely pistonic, i.e. when the entire cone moves in and out as a unit without cone breakup.
  • Create New...