Vooloco

Can you guys give me some box specs on 1 fully loaded SSD10 taking about 1200w? I don't really want the biggest box because that's kind of the point of a 10" to save space, but if it has to be bigger to sound a lot better then that's fine I guess. I'm going to have it custom made, but I don't really know where to go for that either.

Ok, I'll probably get the SSD. Another thing is, when fi says a box's cubic feet for the sub is that with or without displacement?

Hey, for the SSD without cooling and flatwind it won't take 1000w RMS right, but if it's fully loaded it will? Or will it take 1000w RMS as is and then loaded is more?

every time you order a Fi woofer, it has to be built FROM SCRATCH from the time you place the order, hence the wait time. they dont just pick up an already built woofer from the warehouse and have it shipped out like aq does. dont get me wrong, they're both great brands, but im just telling the truth. That being said do you think fi is better quality?

Fi's website is apparently not very secure. It doesn't have https or anything. Another thing I'm wondering on is AQ's subs ship within 24 hours of purchase and fi has to make your sub when you order it and would be like 2 weeks. Does that sound like fi is better quality?

Also what does QTS mean for an option for the fi ssd? Should I get standard or H-Qts sealed?

Well if they can handle the same power. The real questions is that is the AQ worth more $? AQ=229/SSD=194

Is AQ made in America?

1 10" fi SSD or 1 10" AQ HDC3 copper. The amp would be AQ1200d, can the SSD even handle that amp? Are there any major mechanical differences between them? Would one of them be louder over the other on that power? Don't view this as a VS thread because it's not intended like that theses subs have different power ratings and I need to know what would be better for me. Thanks

So there probably won't be a difference with that kid of power?

It would be a waste to get a sub that can take 3+ thousand watts to only put 1200 through it. You would be better off getting a lesser sub and putting the saved money into other thingd 3000 watts RMS? You'll blow both of those subs at that. AQ is rated at 1k and the fi bl is 1.5k.

I might upgrade the amp to a 2000 watt one in a few months.

Can an aq hdc3 take as much power as a fully loaded fi bl? Also what would work better with about 1200 watts going to it? Thanks

oh i see. well its all what you want. if you want to hit the lows with the 1000 rms just get a 15 or an 18. Can you fit? if not go with the 10s. but try the 1 10 to see if its enough. And you could tune lower so you can play it louder at lower hz without bottoming out or breaking ur sub. Well I could have enough the trunk is like 1 foot tall by 4 wide and 3 long, but I would like subs with not a big box, but a lot of noise.

I need a new amp and another battery and a bigger box so that's about 400$.