jsmoke222000

they are 5x135 they will fit 97'-03' ford f-150/expedition but they make adapters for everything.

Well it's like I always say, "When the going gets tough, the tough do what the fuck they gotta do inorder to get out into the middle of the lake to catch some fish!" lmfao!!! The brooms actually worked great for a few days. Then they kinda fell apart. So I took the broom handles & a small peice of 1x4 & made new paddles! no pics of thise though.

Bass, hmmmmmm..................Well last month I was on a land job in Woodville, Texas & there was a lake on the property where we were drilling. I snuck away from the rig & borrowed this boat I found in the weeds next to the lake. My buddy & I used some old brooms to paddle around the lake! We went fishing while we were supposed to be @ the rig working! It oficially kicked ass! We got paid to go fishing! I love my job!!!

Hell yes! Send me a sticker & I'll put that shit on the side of the next rig I go on! I'll email you my address. your PM is still full.

I'd love to have those chrome alts but I have to buy a Tahoe first. I am looking for 4 Rockford T1 12 D2's. My cost on them is $180 + shipping. Do you have a hookup where I could get them any cheaper than that? shipping to 70611 Thanks Can You let me in 18+ I tried to PM but yours is still full

Well this job has it's good points. Right now I make about $1,200 a week after taxes. I might stay out here for 3 or 4 weeks at a time but when I get home I have a few weeks off to do whatever I want. When I am out here I have no expenses! My only expense is driving to the boat dock or heliport & I get paid $0.53 per mile. All my food is paid for out here. They serve 4 meals a day, all you can eat. Steak on Tuesday & Saturday, Seafood day if Friday, Fried Chicken on Sunday. They do all your laundry for you. They make your bed every day, clean your room, ect. Free Satelite TV, Internet, Pool table, ping pong, you can fish when your shift is over. It's really a pretty sweet job! If you really think about it, I come out really good with no daily expenses. No driving back & forth to work every day, ect. Sometimes it kinda sucks being out here for such a long time but it is well worth it when I get home & I can sleep late every day & do whatever I want on my days off.

The water depth on this location is 95' & the rig is 115' above the water. I's a pretty cool job. It get boring as hell sometimes though. I make pretty good $ though. I got my stereo biz on the side when I home. It's cool to sit out here for a few weeks & stack up some money so that I can just do whatever I want when I get home.

Check this out. I work offshore in the Gulf of Mexico on oil rigs as a mud logger. Right now I am on a rig named The Herculeus 200 (formerly Todco 200) about 35 miles off the coast of Venice, Louisiana. Well we get on & off the rig by using the crane & a personel basket. The crane picks up the personel basket & you stand on it, hang on & the crane lifts you up on the rig. Kinda fun too. Anyway, I was lifted onto this rig 2 days ago by this very same crane. Some guys were leaving today & the crane was swinging in to pick up the personel basket when the crane boom fell! I think the brake or clutch failed on the crane but either way it's fucked up! Keep in mind that if this would have happened 2 minutes later 4 men would be dead! Just another day in the oil field! Enjoy the pics.

bump

ahhhhhhhh i see. well if you got a hookup like that, go for it. can you get me a price on 4 T1 12 D2's? I can get them through my distributor but I'm always looking for a deal. I'll pm you with my cost.

hmmmmmmmmm......................Bump

Just a suggestion... You might wanna try a T3k or T4k on the T1's before going for T2's. I had 2 T1000bd's on my 4 T1 12's & then moved up to the T3k & it made a huge difference. I guess the oly problem doing that is getting 4 D2's. I just think you might be suprised in the sound of the T1's with max wattage pushing them. Good luck with whatever you decide. Just make it loud!

damn bro, why are you dumping the T1's so fast? If you can swap the 15's for 4 D2 T1 12's I'll get the 12's from you. This is kinda off topic, but what are you upgrading to?

sounds like bad batteries or alt problem, but if you say the voltage is the same as it was then I dunno? swap rca jacks for sure. double check the voltage @ the amp! Are these dual voice coil woofers? could it be possible that a wire came off of one of the coils? check the subs for a bad or broken lead to the coils. If it is a ported box be sure to check for something covering the port. I know that sounds stupid but you never know?

I purchased 2 of these off of ebay yesterday. Inline Volt/Amp meter Well the seller sent me an email explaining that the item was out of stock & is now sending me this inline Amp/Volt meter/ ANL fuse holder with 100 amp fuses as a replacement for no additional cost. ANL fuse holder / Amp/Volt meter I just thought I would pass it along to you guys. I have been unable to find these anywhere else on the internet. The only thing I can seem to find is inline products that read either voltage or amperage, not both, certainly not at the same time. To me the fuse holder was kinda like a free upgrade.

http://cgi.ebay.com/Fluke-98-Digital-Scope...1QQcmdZViewItem here is one of those high dollar flukes on ebay. you might be able to get a good deal on it

this is a super bad ass scope meter. this is probably way above & beyond what you would want to buy but it would damn sure do the job! http://us.fluke.com/usen/products/Fluke+19...(FlukeProducts)

I agree with ray,clipped signal all way. distortion will kill your subs very quickly. Alot of people think that distortion is something that you can hear. this is not always true. I would reccoment getting a DMM with a scope on it. They are kinda expensive. With a scope you can properly set your amp to send a undisatorted signal to your sub.

I have my own buisness in Lake Charles, Louisiana. I have had a website for about a year. I haven't really done anything to it. It's pretty plain to say the least. Anyway, when I got the site I planned on building it myself. Well I soon figured out that I don't have the time or the skills to do it on my own. So I enlisted a guy that I work with to help me out. It's been 6 months & I haven't seen any results from him either. I need professional help!!! I need a web designer to revamp my site & make it alot easier for me to update it. The guy who I thought was gonna build it for me has just been dragging his ass & I have some software that he needed. I have a copy of flash 8 & dreamweaver 8 which I have no fucking clue how to use! They do me no good what so ever! I'll gladly give up the software & pay for someone to hook my site up. Please respond if you have interest in helping me out or if you can point me in the right direction. you can either post here, pm me or email me directly [email protected] The website in question is www.3rdcoastcustoms.net

is that a ZX2500.1? Pics of the amp please!!! pm me a price

I am looking for the following items: 4 Rockford Fosgate T1 12's Dual 2 ohm 4 Kinetik 2400's Eclipse CD7100 2000 - 2005 Chevy Tahoe / GMC Yukon / Caddy Escalade for around $5,000 I also have the following items for sale or trade. 3 1.2 farad caps, 250 amp Ohio Generator Alt & dual alt bracket. here is the link: FS or Trade

For the love of God, YES WE NEED A PLAYOFF SYSTEM!!!

pics, price, very interested!!!

I have a few items for sale or possible trade. 3 ProAcoustic Professional Series 1.2 farad stiffening capacitors - $20 each or $50 for all 3 (1 cap has small dent but works fine, see pic) Dual alternator bracket for 2000 - 2005 GM Vortec 5.3 or 6.0 - $200 250 Amp alternator from Ohio Generator, fits Ford 97' - 03' 4.6 or 5.3 V8 - $300 I am looking for rockford T1 12's D2, Kinetik 2400, Infinity Kappa 5.25" 6.5" or 6x9's. If you have other trade offers feel free to throw them out there. here is a pic of the bracket in a truck

I can get you some provision. www.provisiontvusa.com