rizzy71

Not bad for being partially drunk. Attaching first baffle Second baffle on Carpeting. Turned out really good for my first time doing it, can barely find any of the seems.

First baffle, finding centers for the sub cutouts Cutting the holes

Painting the port Attaching the bottom

This is a build I did for a friends Blazer. 2-15" Diamond Audio D9's 2-Memphis MOJO 2500's 2 Runs of 1/0 + and - Big 3 done it 4awg because he didn't have any more 1/0 but will be redone when he gets more. Ohio Generators 280amp alt. 3-KINETIK HC1800's 1-KINETIK HC800 1-Red Top under the hood Box is 4.88cubic feet tuned to 33.57Hz Here it the old box, that sounded like shit. How the shop that originally did the install put the batteries and amps. The port Front and port put together Putting the sides on We like to use a lot of glue.

Hell yeah! Congrats

Diamonds site says 2.5cubes per 15" sub. Starting on it tonight, I'll take pics.

1000rms subs, wired at 2ohms, so only 1250 to each. That's not too much on them.

Would this be better, or would it need to be even smaller?

BUMP..... Hoping to start building today and don't want the box to be shit.

I'm building a box for a friend's two 15" Diamond Audio D9's. They're powered by 2 Memphis MOJO 2500's, he has 3 Kinetik KHC1800's and 1 KHC800, and an Ohio Generators 280amp alt. 3 runs of 1/0 power and ground. I will be doing the Big 3 in 1/0. The shop that installed it all just used two prefab 15" boxes tuned at 43Hz. Here is what I came up with. It will have bracing and a double baffle, just didn't add in in the drawings. Let me know what you think and if it looks right. Thanks

Takes a bit to get it going, but it's a pretty good one. 2800HP truck

http://www.wimp.com/accentgirl/ I really want to bang this chick, she could be like a different girl every time, only have to turn the lights off.

Still funny as hell.

The heated seats should have the same fuse as the power controls for the seats (AUX), so if you can still move them then it's not the fuse. Under the seat there should be two separate wiring harnesses coming through the floor (one for heated seats, one for controls) sometimes they can loosen up and not be fully connected, make sure they're plugged in tight. Same thing happens to the drivers seat in my car, and it happened in a friends Gran Prix. First place I would check for the back power windows is the main control in the drivers door. Take off the drivers door panel or pop out the controls for the windows, make sure everything is plugged in. If that's not all plugged in right then the other windows wont work since they all run from there for locking the windows so they can't be controlled by the other switches, and so the driver can control all of the windows. If that is all right then check each back one and see if it's plugged in or if something else is messed up. Since your car died twice, how long did it run for after jumping it the first time? Possibly didn't run long enough for the alt to charge the battery, or the alt could be bad. There shouldn't be a light on all the time on the amp, should only be on when the key is turned and the car is on. Which means it is getting constant power. How is the remote hooked up? Is it ran from the HU to the amp, or is there a jumper wire hooked from the power terminal on the amp to the remote terminal, or remote wire could be ran directly from the battery to the amp. If the remote wire is ran from the HU it could be hooked up wrong. Could of connected it in with the power for the HU instead of where it should be. The remote wire should be hooked up to the blue wire (usually with a white stripe) coming from the wiring harness. Sorry for the novel, just things I have seen and can think of.

Thank you!

Any one know of a site that has all of the Family Guy episodes and you can watch them on there? I know there are ones for South Park (http://www.southparkstudios.com/, http://allsp.com/) and other TV shows, but I can't find any for Family Guy.

Should say on the back of the ticket, or have a number to call.

Thanks for the reply. You have the plan right, but it will just be the cup holders and the storage place in the top back of it, the front will be covered, at least that's the plan for now. If it's easier and cheaper, then I will just do it the way you said and make it so the front storage pocket is accessible. How do I order from Evercoat? I didn't find any where to order from on their site, do I just have to call them? The only thing is that the front of it doesn't quite meet up right. Any way to take care of that and make it meet up like it should and be smooth? Here is a pic of it with the spot that doesn't quite meet up in the red rectangle. The glass made it so it is even now, could I just use that Evercoat stuff and clamp it down, then use body filler to make it smooth?

Both of the 4x6s that were in the dash.

I saw that someone making a center console used wire to hold the fabric in place, kind of like stitching it down to the plastic. Here is after it's all wired down and clamps are off. Now I just have to go get more resin, then glass this up, cut out for the storage thing in the top and cut out for the cup holders, then sand, fill, sand, and paint.

The center console is two separate pieces, he wants it to be just one. So I started to glass it together. Did one layer of fiberglass over where the two pieces join to get rid of the gap between them. Then, started to wrap it. Stretched and clamped.

This is my friends '95 Blazer that we are building. Already bagged in the front, we will be 4-linking and bagging the back. So far we have completely stripped out the whole interior, ran wires for the compressors and amp. This is going to be a very slow build, but should be really nice when finished. The guy he got it from rattle canned it flat black, we will be repainting it. Thinking black with a heavy green or blue metal flake in it so it will show up green or blue when the sun hits it, but black in the dark. He works at a body shop, so we have access to any of that stuff we need. Setting next to his dad's truck on 36"s Almost completely stripped out, will be doing all black interior. Wont be putting the back seats back in, eventually will be doing a wall. The guy he got it from gave him a Memphis 12" with a Kenwood amp in a shitty box, I'm going to build a T-Line for it till when we 4link and wall it off.