Jump to content

SlamminBeats

Members
  • Posts

    3974
  • Joined

  • Last visited

Everything posted by SlamminBeats

  1. So i have 3.5s on my dash and we all know that they suck in terms of SQ/loudness no matter which brand. So, i want to do bullet tweeters. Would a cutout diameter of 3.55 fit better or 2.75? i assume the 3.55 would fit but is the cutout diameter the same at the bolt hole circle? Also how would this sound? I will have 6.5 DD VO 's in the doors to accompany the bullet tweets
  2. yea im going to try and use 2 subs to get more power handling, maybe can fit 2 15s each in 3 cubes
  3. sounds like im not going to be a loud muthaf*ka anymore. so no more turning everybodys head and making ppl dance on the street??
  4. think i got a good idea of what im gonna run thou, might be louder.
  5. Being that I never have done termlab is that a noticeable difference? Or slightly? that would be extremely noticeable
  6. sweet.... maybe i should just get 2 12s of the same woofer i have now, at least power handling will be doubled.
  7. How disappointed will i be? Current system in sig Should i make up for the loss by getting more power?? also i dont think my 18 will fit in it.
  8. how big is the trunk? also is the radio an easy swap?
  9. i dont follow? ^^^ i took off the door panels to mount the speaker in the stock location. its a 5.25
  10. gains set with DD1 panels deadened stock space is only a 5.25.....
  11. you can only get so loud with one tweet like i have and a 5.25 in the factory location some people would be content with it, but me, not so much If you want to go very loud I think you should go for the Digital Designs VO-M6,5 or perhaps the 8 inch VO-M8. With the sensitivity of 98dB for the 6" you could go for 122dB for one speaker at 256W, +3dB when doubled as a pair. Loud enough to get permanent hearing damage and they go for an easy fit in the stock location to. Eights can be fitted behind the door panels in both OG9-5, NG9-3 and newer SS modells.VO-M6 : http://www.ddaudio.c...ies/vo-m65.aspx VO-M8 : http://www.ddaudio.c...ries/vo-m8.aspx If such results are not good enough I think one need to build new door panels with multiplied speakers. I would put the speakers in front of the door and low. For my own car I recently bought four tens, which theoretically should be able to produce 132dB at 512W before cabin gain. As a try-out. exactly the speakers im going to use, one vo 6.5 and one vo b1 question is...where??
  12. you can only get so loud with one tweet like i have and a 5.25 in the factory location some people would be content with it, but me, not so much
  13. i have this already. i mean its ok in terms of sq and loudness, but i want more loudness the DD-1 helped alot but still i need 6.5's
  14. yea...those kicker 3.5's.....awful speakers. cant even handle HU power.
  15. kids going to be such a straight edge after his a** whooping
  16. ok so instead of adding level, decrease the ones you dont want got it man ill try some things out tm
  17. ok and with the EQ on the deck and all, isnt it gonna clip when i switch the loudness to the highs? it sounds way better in my opinion when i put this on. also i usually put the bass level to +1 on the pioneer deck (different from the Sub level). should i not do any of this?, i also have something called sound retriever.
  18. ok im gonna try it completely without it too but 0 for finding HU clipping and on Bass amp clipping if i do use it got it!! edit: tits i could be hella louder then without it? or just flatter? i basically play music thats between 29-41 hz
  19. 5.If you have a “bass boost” switch set it to where you think it will be set when used. 6. If you have a bass boost knob or level control knob, set them to the middle of their range. This will allow a slight adustment up or Manuel steps DAH FAQ??? would disconnecting the peq when finding the HU clipping be ok? just to avoid that confusion?
  20. ooo i mean it only boosts the bass though edit: think its the boost, preset at 45 hz
  21. so if it is then keep at 0 the whole time??
  22. Same here, muddy bass. You have an PEQ, so its a gain knob, i assume it's a fosgate peq. so when looking for HU clipping do i keep the PEQ at 0 or halfway? and when setting the bass amp do i keep it at 0 or halfway? yes its the rockford one
  23. whats the Punch EQ then by Rockford? assume a bass boost? so keep it all the way down the whole time??
×
×
  • Create New...