Jump to content

tacomabanga1986

18+ All Access!
  • Posts

    5390
  • Joined

  • Last visited

Everything posted by tacomabanga1986

  1. This post cannot be displayed because it is in a password protected forum. Enter Password
  2. all my ground points i did was were the factory wires were n i just switched em from 10guage to 0guage, thats all, n mine was so tiny i just got rid of it anyways, looks cleaner without the little black wires hangin there
  3. hope that helps, or clears up any of ur questions, the only wires i left was factory alt wire, n just ran a wire str8 from the alt to battery pos threw a fuse holder, n wala and on the secondary battery, it depents really when i first added my extra battery my mids n highs amp sounded like it got a 100w boost in power, my mids are alot louder n midbass alot cleaner, n subs sound awesome to, but a extra battery helps if u run around 1000w or more, i never tried runnin anything around 1000w without a second battery or atleast a cap cause i dnt want to mess up anything
  4. on alt wise, my alt is 70 amps n i done the big three in 0guage n mine flotes around 14.x volts, with air or radio full tilt doesnt go below 13.8, but i just replaced all my ground wires with 0guage due to the fact that they was only 10-12guage n wouldn't of helped any if they was still there or not, but if ur factory grounds are 4guage ied keep em n just add to it, n i just ran a wire from my alt to a fuse, then to a dist block( i have 2 batterys) then to battery pos, n make sure u sand the spot to bare metal befor u do ur upgrade n dont tightin the bolt or w/e u use to attach ur grounds cause the sheet metal is thin n it will strip, i stripped about 3 holes befor i got mine right, n has worked every since heres some pics of my big three if that helps from chassis to block from chassis to battery neg alt to fuse holder n dist block n battery pos, the round fuse holder goes to rear battery, the other one goes to alt
  5. This post cannot be displayed because it is in a password protected forum. Enter Password
  6. This post cannot be displayed because it is in a password protected forum. Enter Password
  7. This post cannot be displayed because it is in a password protected forum. Enter Password
  8. This post cannot be displayed because it is in a password protected forum. Enter Password
  9. This post cannot be displayed because it is in a password protected forum. Enter Password
  10. This post cannot be displayed because it is in a password protected forum. Enter Password
  11. This post cannot be displayed because it is in a password protected forum. Enter Password
  12. This post cannot be displayed because it is in a password protected forum. Enter Password
  13. This post cannot be displayed because it is in a password protected forum. Enter Password
  14. This post cannot be displayed because it is in a password protected forum. Enter Password
  15. This post cannot be displayed because it is in a password protected forum. Enter Password
  16. This post cannot be displayed because it is in a password protected forum. Enter Password
  17. This post cannot be displayed because it is in a password protected forum. Enter Password
  18. lol, we got about 4 table saws here but none costed $3,000 but then again if u do alot of cabnet work n what knot it would be worth it, i wasnt sayin the $60 was expensive but the $3k but u can never put a price on safety, ied get one if i did that much work but due to the fact that we already have about 4 or so table saws here that work fine i dnt need another, lol, not tryin to brag or anything but some ppl like to get inpatient when workin, like this dumb shit
  19. name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">i want this thing but it costs to much to fix
  20. i always digg this song name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">2pac 4 life mane, i had all of his cds n wasnt ever sick of any of it, only rapper that never got old to me but then again i gotta jam this song, http://www.youtube.com/watch?v=EjheiI0BFqg will smith - just the two of us, now that im a dad with a lil boy it really hits home to me
  21. for alternator ied go a lil over the amp rateing of the alternator, if its peak is 105 ied do 150, if its 150 ied do 200, just to be safe, any less than the amprage might harm the fuse tryin to push more current threw it, on my trucks big 3 in 0guage i got a 150amp fuse on alternator that doe s70amps, 250 to rear wire(was to a battery but i took it out when i took out my system), in my geo's big 3 in 4guage i got a 80amp fuse on the 75amp alternator, and i forgot the fuseing on the wire goin to the back but its 4guage also, and i have no probs yet so i guess it works fine
  22. This post cannot be displayed because it is in a password protected forum. Enter Password
  23. This post cannot be displayed because it is in a password protected forum. Enter Password
  24. This post cannot be displayed because it is in a password protected forum. Enter Password
  25. This post cannot be displayed because it is in a password protected forum. Enter Password
×
×
  • Create New...