Chrysler200s

with a 160A stock alt? 120A or 140A is the largest stock alts I have ever seen. If its a true 160A thats awesome My 2007 Tahoe has a stock 160 amp alt also. OP, make sure you do the big three in 1/0 along with the D3400 and you should be good The wire is on the way for the Big 3..and the D3400. I just wasnt sure if I needed an extra battery or a bigger HO alt. I'm still not sure what I will be running sub wise. Upfront I'm putting (2) sets of RF T2 6.5" components..4 mids, 4 tweeters off of a RF T400..and either a RF T1000 bdcp or T1500 bdcp for subs. I'm leaning towards the T1500 bdcp and running an Orion HCCA 10" off it..

yea sorry, got busy for awhile..its a 2011 Chrysler 200 S, and the 160 is stock on the S, it has the pentastar 3.6 V6..along with leather/suede inserts on the seats, sunroof, upgraded Boston sound system, the rims..it is all 'stock'..you can't find the 'S' model without all of it. I will pictures up soon as I will be starting a build!

okay, thanks..just wanted to make sure I didnt hurt anything

I plan on replacing my main battery with D3400 XS and I have a 160 amp stock alternator..I'm goin to be running a RF t400 and a t1000 bdcp, so that is around 1500 RMS total. Do I need a second battery and/or HO alt??

Okay..I thought I understood, but now I'm confused. lol .I'm wanting to add (2) SETS of tweeters and midwoofers..4 midwoofers and 4 tweeters. Could I bridged any of tweeters or woofers? like before or after the crossover? I'm sorry for the confusion.. haha I'm trying to draw a wiring diagram now.

anyone? The RF T2 components I will be using say that they are 100watt RMS per side/ 200watt RMS pair..but it also says on the back of the 6.5" woofer that it is 100watt RMS..does the tweeter run 100watt RMS as well?

You are correct wonderbread..I thought I explained it better than I obviously did. I dont really DL off of Datpiff, I normally get Lloyd Banks mixtapes off his website, but same difference.

so is 50 watt to the midwoofer and 50 watt to the tweeter

I believe the T2 components are 200 watt RMS a pair and the T600 4 channel amp (4 ohms: 100 watts x 4 chan. 2 ohms: 150 watts x 4 chan.) That is the other half of the issue..I'm not too sure on how to wire all this.

I'm looking to add 2 sets of Rockford Fosgate T2652-S component speakers..4 tweeters and 4 6.5" midwoofers. I'm looking to run them off the Power Series T600-4 4 channel. Will this be an okay set-up? and I'm kinda wondering how I would wire these as well. I'm a noob at crossovers!

Is that a real answer? Stop talking. OP, ya ever think about buying cds? Like from cd stores? They have those. Have you ever thought about reading the ENTIRE post before leaving a smartass comment..because I cleary explain what your comment was about. You know what I mean?

Thank you Skullz...I'm trying this right now

There is always a considerable difference in quality when comparing actual authentic cd's and burnt cd's off of my computer. I have it set on the highest quality for my burner but it still isn't great. Am I forever stuck with crappy cd's. (I dont steal music btw..I buy my cd's but I do download the occasional FREE mixtape)..lol Just wanted to clarify

I was wondering where you were at Jon. I will placing my order tomorrow, and hopefully I'll start putting up pictures within a week or two as I get started on my project. Thanks for all the input guys!!

Thanks emperor..thats exactly what I was looking for. Yes, I purchased it brand new and only has 3,500 miles and parked for winter. That is why I have decided to do all of this now. I'm a little stuck trying to take the B-pillar trim piece out. I'm not sure how the clip releases at the top of the piece above the seat belt, but everything else is stripped, except both B-pillar trim pieces and the headliner. Also adding alot more, I will take pictures and start a build log in about two weeks. I havent broke any clips, yet!!..but I did crack the C-pillar trim piece, a little bit. Thanks for the help!!

you dont think I should even add foam or anything..I dont want my panels to rattle or anything

thank you xterra..I would think I would need more sq. footage than that now you said that. I'm looking to do my entire car..doors, floor, roof, and entire trunk

JBL Audio - 580rms..7years old and still kicking

Hello, new to the forum and I knew if I needed car audio advice, this is the place to get it. As my name almost suggest, (realize now it is mispelled) but hey..I have a 2011 Chrysler 200s and I'm looking to sound deaden the car before I add some subs. I was planning on adding 80sq ft. of Damplifier Pro and didnt really know what else I should add. I obviously don't want my panels rattling or road noise. Would I be okay with just adding the Luxury Liner Pro? Any suggestions Jon? lol