Nivram

Some time the glue that they use will pull off a lil piece of paint.. but hey if you pay to have it done and they mess up the they have to paint it free!

those guys pull dents with hot glue guns and golf clubs.

http://wefixdings.com/michigan/ann-arbor-mi-dent-repair-removal/index.htm

try dry ice bro.. Or take it to a PDR guy Painless dent removal!

to be honest im not to sure yett. I havnt gotten that far and my subs havnt arrived yet. I was just going to use that cardboard tube self tap screw it in to the headliner and box. then lots of aluminum foil and tape where i dont want the glass.. Fiberglass over the cardboard tube ,sand, light coat of body filler sand then tape and paint. I really dont want to put glass on my windows and door panels so im going to have to get a bit creative with that. Idk. il let you know when i get there but im still waiting on these subs : /

Good luck if you need help lmk.

I know my wall is nowhere near perfect but yeaa. You gotta figure out what kind of wall you want and what kind of wall your vehicle will let you build. b piller walls are sick but i couldnt do that in my car because i wouldnt have been able to move the seat back to a comfy driving position. First i started with the floor of it. Pulled out the seats seatbelts ,brackets, cpillar trim, rear deck trim ect.. Then i had to make a level surface for the floor of the box to lay on with 2x4. I put 90degree brackets on the 2x4 into the chassis / frame of the car to hold it in while bumpin. After that i laid down my bull ish particle board and screwed it in to the 2x4 base . I then used the 2x4 to frame or make a base for the back of the box. put in 90's and so on screwed it in. The fun part. I built the frame for the top sides and face all at the same time Installed the top first then sides then face. it takes alot of time and planning out. 5k electronics in westland bbuild some sick looking walls. as for making it pretty they told me to use this stuff http://www.yarnivore.com/francis/archives/images/cardboard.jpg Cut it in half or 1/4s to have a nice curve to glass over for a nice roofline trim piece. I need to figure out how to make it pretty because thats the step im going to be at after my subs get here. I need a port tune and faceplates then its time for cosmetics.

I have room below the 15's to fit another 2. Its just getting nice out and im starting to have the need for speed.

Dude that would be sick!! Do itt!

I have a mac mini i would like to trade for sa 15. If no one is interested in the trade i have a lil bit of cash. i would like the d4 subs. Thanks

Im not sure if the are strabable or not

I would like to just go ahead and buy another rockford. my t1000's birthsheet is 1552rms @1ohm i dont think thats to bad at all

Okay then should i just order up a second t1000?

I need to seal off my wall also. I made some fun shapes for the sides but i havnt done the roof line just yett.

correct! dvc4's Thanks!

I just want to feed them 1000 per sub. I heard That if its clean power i shouldnt have an issue.

Texted

who would be interested in it? pm me numbers or somthing sir!!

I dont know what to do :/

Ive heard alot of good things about the AQ 2200 however sonic will only give me store credit if i returned my t1000

fuckkk i take that back its 3200rms @ 2ohm so i couldnt take advantage of its power

okay i didnt want to trade him my new t1000 for a who knows how old and whatnot ap3000. I was leaning toward the RE because i like the 2500rms @1ohm To one channel so i could wire the subs down to 1ohm While the hifonics i would have to run 1100rms @ 2ohm 2 channels So i think i would be getting more out of the RE but The Hifonics is Cea compliant and if i ever wanted to upgrade to 4 sa 15's i could run 3200rms @1ohm.

i have 2 sa15 4ohm subs

So i have a rockford t1000bdcp however im in need of alot more power Which amp do you think i should go with. First The audio pipe 3000d Found a guy on craigslist that wants to trade for my t1000 http://www.audiopipe.com/products/amplifiers/ap/ap-30001d.html Second Hifonics colossus I would be getting new from sonic http://www.hifonics.com/Hifonics_Colossus_Amplifiers.html Third RE 5000.1 I would also be getting this new if i went this route http://www.sonicelectronix.com/item_35819_RE-Audio-XTX-5000.1-XTX5000.1.html What should i go with?