Jump to content

punkrockprs

Members
  • Posts

    974
  • Joined

  • Last visited

Posts posted by punkrockprs

  1. i was wondering how much you guys think i can get for this amp. theres a older one local to me up for 160. im only selling it cause i bought another sub and they are 300 watts rms each so im looking for a 600 watt amp heres a picture of the amp

    trunk5.png

    heres the specs

    Class A/B Power (watts) Mono 300 @ 2 Ohms Remote Bass Control No ZXRC Remote Bass capable (sold sep.) Yes Length (in., cm) 13-1/2, 34.2

    Common to all Models

    Height: 2-1/8", 5.4cm

    Width: 9-5/8", 24.4cm

    Frequency Response: 25-200Hz (ZX300.1 25-20kHz), +0/-1dB

    Input Sensitivity: High Level 250mV-10V, Low Level 125mV-5V

    Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power

    Active Crossover: 24dB/octave, variable 50Hz-200Hz (ZX300.1 fixed at 80Hz), low pass only

    24dB/octave high-pass subsonic filter fixed @ 25Hz

    KICKEQ™ Boost: Variable to +18dB (ZX300.1 selectable +12dB), centered @ 40Hz

    also i have the origional manufacture box and it says inside all tests passed and kicker certified power 347 watts.

  2. finally got enough posts so id like to sell my speakers. i have 2 pairs of Toxik Audio 6x5 speakers.both sets are used but never put on a amplifier. One set has the grills and one set does not however ill throw in some black pioneer grills the toxik grills show use. speakers work great i need the money. im asking $120 a pair obo for these. here are the pics.

    photo-2011.jpg

    photo-712.jpg

    photo-568.jpg

    photo-1575.jpg

    photo-202.jpg

    let me know if your interested.

  3. yeah like i said im going to be working on a new build to have subs in a box again. the sub i have is free air compatable. i can hear it fine its a clean bass i just want more. so i will be fiberglassing the hole up. well part of it anyway so i can use it as a port into the cabin. i will be buying another kenwood 10 for now and building a box and amp rack when i get some money. eventually i wanna buy a sundown amp and 2 sundown 10s

  4. my sub is mounted in the decklid. also today i ran some more power wires from my distrabution block to my amp. also ran some more ground wires to the amp. i didnt have any more 2 guage wire so i ran 3 8 guage wires to each. equals a 2 guage if you think about it. pics are in my build thread. heres the link. also sub wont be there for long cause im going to be doing a new build. anyways here the link http://www.stevemeadedesigns.com/board/topic/132406-94-g20/

  5. Lately ive been installing stereos and speakers for friends and running wires and stuff. how much should i charge? i want to someday have my own shop and do it for a living. right now ive been paid 20-25 for a deck install (customer brings the deck and harness and anything else needed) and ive been paid 50 for installing front and rear speakers.. i havnt ran amp wires for money yet i did the homie hookup on that and done it for free.. what should i be charging for this stuff? i plan on making some business cards and handing them out. this is my passion so i want to make it my career.

  6. you need a wire harness (varies depending on year) and a antena adapter. when you pull out the factory radio you will need to take off the mounting brackets from the factory radio and use it on your aftermarket one. also for the wire harness there is no ground wire i dont know why they are just like that so you will need to use the ground wire from the aftermarket deck and ground it somewhere behind the dash. (i used the mounting screws and works just fine) let me know if you need any more help

×
×
  • Create New...