jeffrm

Where you located ( on mobile cant see anything )

Ok ill try the one I did and see what happens.

the U255's are my favorite on anything

ok these are the specs for my subs, my max width is 58, max depth is 25, and max height is 18, can someone do something with these, please QT15D- ported- 2.0ft3 4” port x 13 ½” long (36Hz) F3=50Hz 700w 2.5ft3 4” port x 9” long (36Hz) F3=46Hz 700w 3.0ft3 2(4” ports x 17 ¾” long) (36Hz) F3=43Hz 1000w 3.5ft3 2(4” ports x 16 ¼” long) (34Hz) F3=40Hz 1000w 4.5ft3 2(4” ports x 10 ¾” long) (34Hz) F3=37Hz 1000w 4.5ft3 4(4” ports x 6 ½” long) (55Hz) F3=45Hz 1000w (SPL)

i think this would murder lows

is this better

bump i need help

any input on the last one?

so something like this will the port like this be right

So the box needs to shrink once again?

How is the port on those done?

Its very hard to tell havent metered up so I dont know. I think facing up is a little bit louder but im hoping the new box will be even louder.

This is what it looked like facing forward

In my silverado? This is what its like now. The new box will be under the windows and nice lookin.

Yeah its the ac 190. I plan on trimming everything out so it looks like everything was supposed to be there. Im trying to get used to using torres to figure everything out. Im not too worried about the score but I would like to have some fun at the comps at the shows ill be attending and do well.

im hoping it gets loud. the box in my truck now did a 142.6 on an audiocontrol meter and if its as much as they say its off from a termlab that means im only doin in the 30s somewhere and that dont seem right. I know every truck is different but i seen a f150 with 2 american bass 15s inverted firing up, on an atomic 1600.1 (which is what i had in my truck but now i have an rd 1750.1) doing 148s on a tl and id be fine with that.

so this, and how can i do interchangable port for daily and spl

so does this look better

So what I need to do is make the box bigger and adjust the port accordingly. I wanna do a interchangable port for daily and spl. How can I do this?

so other than the displacement being off some does it look good?

yeah i cant find the displacement for my atomics so i found the equivilent from rd and theres say .31 per sub

port is on top with subs the pic is from the top. so 20in deep minus 1.5 for wood is 18.5

will have bracing and all vertical corners rounded

Yeah I know what ya mean, but now I guess imma get some help on redoing a whole new setup. The only thing is that it looks really good.

I had a buddy of mine tell me I could do the changable ports and have one for daily and one for spl which I would love to do. But I have no idea how.