Sethorama

I haven't done the big 3 yet waiting for it to warm up to do that. All wire is AT OFC 1/0 with 2 runs.

Reason I'm asking is because I had a total of 210 ah with my stocks and now I'm down to 110 with the 3400s.

This has been probably covered before I can't seem to find any links. I replaced my 94r size battery's for d3400s. Truck is 13 ram 2500 diesel. My stock battery's are 105ah with 750 cca. It seem the 3400s have less ah but more cca. I still have just as much drop as I had before with the stocks with the new 3400s. Only running a bc2k @ 1 ohm. Alternator is the stock 190 amp until my singer 275 ships hopefully soon. Is my alternator can be able to fix drop or would I need to add a third battery in the back? I drop to high 12s. Idle around a 14.3

GT: sethorama Games: Call of duty ghosts Left for dead--- Already beat it if anyone wants to trade?

I'm replacing both underhood batteries. I'm trying to get away with batteries inside the cab. My trucks stock electrical is pretty stout and I stay 13+ full tilt. I'm replacing my stock 180amp alt with a 275 singer.

Batteries are going in a 2013 ram 2500 diesel. Around 3000rms Going with the 3400s But can't decide which one would suit me better. The s3400s or d3400s

Yea it does it everytime when im close to that area. What are your recommendations on what to do.?

ill try that in the am

Its hard to capture a picture as the vents are small and im using a iphone.. heres that noise i was talking about when poking. but it all looks even..

heres a video for the hell of it

Its pretty stiff. Like i said it sounded fine when i was playing it. it just rubs only on one side if i push down on it. also if i poke on the dust cap it sound different as well if that makes any sense..

Okay than there is no point to make a video. i can squarely push it down and it wont do it. My other sub i can press it at any angle no noise nothing. what could cause this?

i understand what your saying... I just dont understand why this one does it and my other doesnt.. Give me a few momments and ill make a video

if you dont hear any rubbing while playing then you might have not pressed the cone evenly. try doing it again but make sure your press down on it evenly Just checked it again.. I can press directly under the dc logo and get it to rub.its a noticeable rub that you can hear and feel. now if i even it out and press above it as well it doesnt rub if thats what your meaning by square. Is it normal to hear this type of rub because this would be my first one.. And im not pressing it at a angle where it would angle the vc to it.

Thanks ill wait on his reply. but i do believe it will be a warranty repair... Its obviously a defect as my other one doesn't do it.. And my next one i will.. Its only on one side of the sub. you can hear and feel it when pressing on the side only. your can press it squarely and it doesn't do it. You can also tap the dust cap on the end and it also sounds different. that's how i actually first noticed it so i got a second opinion on it. It may play fine now but id rather not have it go out a month or year from now..

mylows10 @ caraudio.com Im currently bassless without is reason im asking Maybe one of them can chime in since this is their section of the forum.

Im sure he is authorized. Hes a DC rep. I just need answers but he hasnt responded. So i figured id post up here since i have no clue if dc has a phone number

I need to find out who to contact on maybe getting some warranty on my subs. I bought a pair of lvl 3 12s around 3 weeks ago. When i was installing today i was pressing one of the subs with my hand down and i could hear the VC rubbing on one side. Works and plays fine but seem like a defect... currently took that sub out so its not getting played.. I bought my subs from a different person from a different site but i cant get a response.. Whats my next step?

Blew a brand new sub with lvl 5 soft parts on a RF1500BDCP today withing 30 mins... Everything set with a dd1 ect ect. Needing a recone kit with whatever available options are available. Location is Oklahoma. Dc rep get ahold of me!

picked up a t1500bdcp locally

Everything sold. Please lock.

ttt

I should id have to look around for it.

Audioque 1200d amp Was bought new in Feb of this year i picked it straight from the DD warehouse in OKC. Asking 200 Plus shipping. M/10 V/9 Has minor surface scratches on it from mounting ect. Specifications Model AQ1200D Frequency Response 20Hz—250Hz Signal to Noise Ratio 100db Low Pass Crossover 24db / Oct Low Pass Crossover Range 20Hz—200Hz Subsonic Crossover Range 10Hz—50Hz Input Sensitivity 0.2V—8V Output Master / Input Slave Connection Yes Working Voltage 8V---16V Efficiency @ 4 ohm 84% Damping Factor Less than 150 Fuse Rating 40Amp X 3 (Linked 240 Amp) Output Power 14.4V @ 1% THD 510X1 @ 4 ohm,870X1 @ 2 ohm,1200X1 @1 ohm Output Power 14.4V @ 5% THD 1470X1 @ 1 ohm Dimensions 12.75"(L)x9.27"(W)x2.35"(H) I also have a dist block made my stinger it has (1) 1/0 in with (2) 4g out- $6 plus shipping Also have a FUSE fist block made my stinger with (1) 1/0 in with (2) 4g out that takes Mini ANL Fuse(MIDI)- $10 plus shipping Also have 6 Knukoncepts Mini Anl(MINI) fuse's 120 Amp - $6 plus shipping Willing to trade the amp for a amp that does 1k @ 2ohms. Like a 1-1.5kBDCP Will add cash if i need to. I dont have any feedback as this is my first sale but have spent over $1200 in the for sale sections on cd players to alternators to subs.

I always end up loosing them when i was a child and find them 3 months later fat as fuck lol