MaxVolume

Very nice, but will the lower Net Volume have a negative effect? And is "Port area per foot" ok at 12? I've heard its best at about 16-17 sq. in.

Maximum width in the back of the Suburban at this time is about 48". If the 0 common wall port is unadvisable, how about a 3 wall slot port on the same side as the subs?

Hello all! This will be the first time I actually try to build a box from scratch (finally have a place to do it). I've been playing with Torres' Calcuator and can't seem to find an appropriate mix of Net Volume, Port Area/cubic ft, and tuning frequency. So here's the program: http://i.imgur.com/n9EJs.jpg And this is my thought process so far. I have 2 12" Kicker CVRs (the older silver and red style) They're powered by a 1000 watt alpine (so obviously not actually 1000 watts) They're going into a Suburban so space isn't much of an issue as long as it fits widthwise and doesn't tower over the seats. I read that the CVR's like about 2.25 cubic feet each when everything is said and done so I think the Net Volume should be around 4.5 cubic feet...correct? I know it doesn't show it in the picture but I was envisioning the subs face up with the port facing out on a seperate wall, with 0 common walls. As far as tuning I'm open to suggestions. I'd prefer volume over quality (seems to be the theme of my ride so far), but again I have little experience in this side of car electronics. Maybe a lower frequency will travel better or give that earthquake vibe I love so much? Again open to any advice you guys want to throw out, even if it's don't nail your hand to the mdf.

very clean and nice build! can't wait to see what the box looks like in the ride *edit* looks like i spoke to soon!