JP Fabrication

One last test fit before Duplicolor Truck Bed Liner. There is no leg or foot obstruction at all.

This is my bud Andrea's '09 Polaris RZR-S. Product to be installed: Source unit-iPod 30g ALPINE PDX-4.150 (2) ALPINE SPR-M700 SWS-1243D (2) PAC line level control for volume and sub level PAC iPod to RCA with charing for iPod Optima Yellow top I already have boxes made for the RZR that house a 10". She said 10's are for little boys and demanded a 12, so I put her to work and had her cut out the speaker ring and jig it up to the box. She did good so I had her weld the amp rack in and lay the glass foundation for the iPod mount.

A customer brought in his Buckshot X5 with a LS2 and a Mendeola S4 sequential shift trans for a street legal kit and a system. A fiberglass roof with windshield is being added. He already has car to car radio and intercom for driver and 4 passengers with iPod input. He wanted to add a system for playing while parked and hanging out. For the system I'm doing: PPI EDZ EQ ALPINE PDX-F6 2 sets ALPINE SPZ-17REF JL12W3v3-4 Optima Yellow Top One set of REF's will be in a pod mounted underneath the hood and the other mounted in the front on interior panels that will be added.

This is my friend's custom built side by side by Buckshot Racing. It is powered by a 160hp Aprilla 1000cc V twin. Product installed: source unit-iTouch ALPINE SPX-17REF ALPINE PDX-4.150 JL 12w3v3-4 PAC LC1 for volume and sub control Optima Yellow Top Stinger volt gauge Objectives: Up front bass Build sub enclosure to owner's specs Have fun while doing it The vehicle

I guide coat sanded to 600 then sprayed with Duplicolor Truck bed liner to match the center console/sub enclosure with 2 15" Treos that has been Rhino lined along with complete exterior of the truck. I then added a sued insert and epoxied in the 90 degree passthrough.

This is my friend's '08 MXT that I will be installing an ipad 2 as the source unit with an Audio Control Three.2 EQ. I will be relocating the air brake switch and the turbo boost knob to a bracket just below the steering wheel to the right and the HVAC will also be moved. The complete exterior of the truck has been Rhino Coated. Here he his charging a hill at Glamis where we go to watch the sunsets: And from the Dub show in LA:

Thanks guys for the compliments. I did this build 2 years ago. It's time for a new one. I'm ripping out all the gear, trading it in for the new RZR XP900 and starting all over again.

For those of you that are not familiar with Glamis Sand Dunes here is a video my bud made. It is a run from camp to Oldsmobile Hill then to "The Ledge" where we hang out for sunset.

New Douglas aluminum rims, paddles, and front buff tires. I BE ROLLIN ON 12'S BIATCH'S

No hanger queen here. This bitch gets used hard and put away wet. +4 long travel kit , Vision X LED mini light, and front bumper installed

Today my RZR made it back to where this build began, SDR. I took it down to show the guys what I've done to compliment their awesome cage and light bar. I have a few small items to finish, trim panel around monitor, wire light bar HID's and a wing with lights and my rear view camera. Then I can move on to suspension and rims. Still waiting on my Livorsi black face, black bezel coolant temp and oil pressure switches.

The sanding is almost done on this project.