WICK3DxGATA
-
Posts
224 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by WICK3DxGATA
-
-
as soon as i get a box built and the subs come in ill try and get a video up
-
well i just ordered the subs. cant wait till they get in so i can install them
-
i plan on getting mine build to 1.5 ported around 34hz if i can
-
that jackhammer is 800 rms@ 2 ohms. get two dual 2 ohm vvx8s and wire them in series. I would say a .6-.75 cucf net box ported tuned to 33-35 range. Should sound very good for two 8s on 400 watts a piece. good news is if you decide to upgrade to the ma-8 later it will work in that same box
thanks man for the help.
-
I would try them out, the specs are nice and you cant beat the price. What amp are you using?
well i have a db800.1 from a couple years ago or a mtx jackhammer 1200.1 which is probably the one ill be using for them but not to sure yet.
-
i wish i could get the MA-8s but im a little tight on money right now and i know thats not an excuse. but i just need some sort of bass back in my truck so i believe i am going to try out these vvx's. Plus i found these vvx 8's on sale for 100 a piece.
-
no one has used these subs?
-
well hopefully someone on here with these subs will chime in and let us know how they are. it would be greatly appreciated if they did.
-
i found these subs on sale online and i am just wondering how well of subs they are. i was wanting to go with 2 12vvx's but i think for the time being i would like to go with just 2 vvx 8's instead then maybe 4 in the future.
just wondering on reviews of these subs what kind of enclosures people have been using for them just anything helpful.
-
never heard of a box built with it but i think it would be pretty bad ass
-
boring over 60 like most people said above it all depends on what the block is.
i would say there are alot of big block that can handle 60 over but just check and make sure first.
-
ive had both 6 and 8k in my sierra but i do have projectors and i like my 8ks alot better than i did my 6s.
-
looks real good i like the sub choice.
-
i still wax mine by hand just not very often
-
-
in my sierra the back doors has 4x6 and i trimmed out a little to fit 6.5s.so yes it can be done its just if you have enough room to trim out.
-
not trying to thread jack this or anything but hey kickass audio i see you have a gmc but im not sure if it will have the same problem the gmc trucks have. i have a 2000 gmc sierra and when i turn my hids on both of mine dont always come on all i have to do is flash my brights and flash back and both of my hids will be on. do you know whats causing them to do that or what i could do to fix them. i arady have a relay that i bought from ddm and it didnt really help at all it.
I have that in the winter time when i ran my 50w ballasts for the low beams but only because my voltage was up in the 15's. If i shut my truck down the voltage would drop and the lights worked just fine. I tried the capacitor mod for the DRL circuit with no success and i have had 4 different relays for the truck too with nothing. When i went back to my 35w ballasts it rarely happened and when it did i just turned my knob to the off position, waited a minute and fired the lights back up and both kicked on. That only happened with my low beams though, never with my fogs. I was about to just bypass the stock switching system and run my own toggle switches but never did that as i didnt think they provided enough voltage to energize the circuits and fully activate the relays.
okay thanks. i also thought about bypassing the stock wiring and just putting in my own switch. well i guess ill keep looking for a little longer if not i will be forsure rewiring.
-
car looks amazing
-
with what he said i would not run HIDs in stock units but i see people o it all the time. i guess its really up to you. i just wouldnt risk it melting anything.
-
not trying to thread jack this or anything but hey kickass audio i see you have a gmc but im not sure if it will have the same problem the gmc trucks have. i have a 2000 gmc sierra and when i turn my hids on both of mine dont always come on all i have to do is flash my brights and flash back and both of my hids will be on. do you know whats causing them to do that or what i could do to fix them. i arady have a relay that i bought from ddm and it didnt really help at all it.
-
yes i had 6000ks first they do have a tint of blue. but most recently i went with 8000k and they are a little more white but to me they seem so much brighter, i am alot happier with the 8000k than i was with the 6000k.
-
no im not to sure on the difference between the 35 or 55. ive had two different sets of 55 because thats the only ones the local place sells. i just know the difference between the colors of the bulbs.
-
HID's are simple to instal.
im not sure on the stock unit melting. but i do know in my truck they do get extremely hot, but i have aftermarket headlights so i do not have to worry about melting.
as for a place to get them ive been told ddm tuning is a good place. but i buy mine locally.
and as for benefits. they are so much brighter.
-
that truck is sick. and those 6.2 are nice if you get it tuned there pretty fast.
.gif){kind=small}
recone question
in SKAR AUDIO - (READ ONLY ARCHIVE)
Posted
got a friend who bought 4 vvx8s awhile back and im not sure what he did to them but he has one that has a little metal hitting sound when the sub hits. just wondering if they sell recone kits for the vvx 8s if so where would he be able to order one?