biohazardbill

I am not new to the audio scene but have not been in it in quite some time. I know technology has changed quite a bit since I was last in it. That being said in doing some research on a vehicle I am putting together I ran across Sundown. I found a semi local dealer and went to hear a demo. So the guy had a pair of X15s in a ported in closure. He was running about 3k watts. Sounded really good, and was hitting quite low. I was impressed. That being said I think I am going to use Sundown as my subs and probably amps too as I like to coordinate. The problem is this is going into a Bagged 65 Suburban. Being that it is a classic I am wanting to be as stealthy as possible as I go to a lot of shows. I do not want to have the woofers exposed so I am looking for ideas. I am trying to avoid the subs facing the rear due to the fact that I am going to have enough of a hard time keeping the doors from rattling as it is so I am looking for ideas. I was thinking maybe a bandpass box. This is not an SPL vehicle, I like a variety of genres of music, but when I want it to get down.... I want it to get down if you know what I mean. Anyone have any experience with the X-15s in a bandpass enclosure? If I don't have enough room I could potentially drop down to 12's, just trying to get as much bang as I can while maintaining a clean look. I don't have dimensions of my workable area at the moment but I can get some measurements this weekend. Any help appreciated.

One more question.. I just got my combo pack today and reading through the instructions and the brochure included leads me to the following: In the brochure for the VU-DIN it states that the operating range is 9v-24v. Is that power input voltage or amp speaker lead input voltage? Per the instruction manual for the DD-1 the DD-1 has an operating voltage of 1.2vrms - 125vrms (15,000 watts @ 1 ohm) Just making sure the guage will handle the same power as the DD-1 for subwoofer power.

Will there be a single guage version for those that only will be using 1 mono block amp for subs?

So you guys are comparing everything to rap music. That brings me to a question. If a user listens to different styles of music, how do you tell the typical db tones used by that style of music. IE I have a friend who listens to hardcore rock and another that typically listens to country. Would i set both at -10db and then just tell them to be careful if they were playing a rap song?

Steve got ahold of me today. Apparantly there was a glitch in the webservice somewhere and after some digging he found that he did receive my payment but the order was never logged into his system. He is shipping out today Thanks Steve for the quick response.

When i originally ordered everything There was a small issue with the website and it didnt accept the data. so I redid my order and got the confirmation email. When that happened I called the number on the website for them and left a message to what happened to make sure they knew I didnt want 2 combos and to make sure I wasnt double billed. Requested a callback to confirm, never got one. I left a message again today. Posted here as I am sure it will get seen. Not trying to scam, just want what I paid for.

I ordered and paid for both the DD-1 and CC-1 on May 1st, before making this post I did do a little digging and found this: I have yet to receive the product nor any email communucation whatsoever after the initial order thanking me for ordering the stuff. This was ordered off http://www.wccaraudio.com/ . I verified funds were pulled from my CC on the 3rd. Any Ideas?