Jump to content

boostin302

Members
  • Posts

    276
  • Joined

  • Last visited

Posts posted by boostin302

  1. bought a 270a alt from jason, great guy to work with. bought it a few months back and havent been able to install it yet, sent me a text a few days ago to check up on it n see how its going. what a great seller!!!

    would buy again from him without thinking twice.

    Just to let everybody know, i took the alt to a shop that could do a load check on it ( load bank up to 800amps) and it tested out PERFECT!!!. Had them clean the case up and it is working beautiful in my car. Thanks again jason.

  2. here ya go Steve.

    got a bottle of tequila that's about 24 years old (give or take 2 years).

    IMG_0050_zps5f8fa0c1.jpg

    IMG_0051_zps4cc5d8a1.jpg

    IMG_0055_zpsefa3ac0e.jpg

    80 proof, never opened and worm on bottom still.

    growing up i always remembered seeing this bottle in my grandparents cabinets, usually way in the back behind the cereal.

    story behind it is my grandmother never believed that a worm can come in a tequila bottle so my grandpa and dad drove to either Mexico or Texas to get this. ( That's what i was always told) i just have it sitting in the cabinet. might open it one day to have a toast to old memory's to my grandpa.

    has Mexico liquor bottle molded on the bottom and the numbers 8 and 7 there under it.

    • Like (+1 Rep) 2
  3. if your wondering about the subs, they are 12 inch treo SSX subs. grossly under rated at 2000 watts RMS.

    8051_10151889366125093_2066136643_n_zps8

    ran the port through the rear deck. port measures out at 7 1/2 x 7 1/2 (outside specs)

    282732_10151889357080093_2670315_n_zps8c

    i made a cover to go under the rear deck lid cause i didnt like how it looked. i also resin'd the underside of the deck lid cover so it wasnt such a pieace of shit.. i'll be making a new custom one soon out of plywood. the cover also helps seal off the trunk. under the cover is alot of expandable foam

    394198_10152832470010093_1079230887_n_zp

    here it is all done before i sealed off the trunk.

    528365_10152776217670093_1290396625_n_zp

    532772_10152776217960093_1028311973_n_zp

  4. i made my own buss bar. 1/8 steel plate. edges grinded down so they dont cut the wire jacket. these will be replaced this coming winter with alum buss bars

    391432_10151889368835093_1806030703_n_zp

    made a fuse bracket that bolts to the power steering fluid resivor. painted it yellow to match the car. holds the 2 fuse holders for the 2 pos runs from front batt to second batt. and the 3rd one is for the alt.

    548595_10151889371465093_787778965_n_zps

    here is the amps. i have one on a rack i made on the side and the other amp is mounted on the sub box with rubber isolaters

    553155_10151889360350093_2016042605_n_zp

    574760_10151889370890093_1206818962_n_zp

    553674_10151889360005093_918979225_n_zps

    checking the Ohm load of the subs with some scrap wire

    552295_10151889366645093_211513877_n_zps

    560881_10151889366390093_119738057_n_zps

  5. 1/0 under the car, zip tied up out of the way. 2 runs of pos and neg from front battery to second battery

    392937_10151889365635093_1262280030_n_zp

    532128_10151889364980093_480634869_n_zps

    final run of 1/0 under the hood and ready to be trimmed

    524018_10151889361870093_528656378_n_zps

    all 1/0 is soldered. over 30 1/0 soldering connections made

    534856_10151889368170093_1894991767_n_zp

    checking for voltage lose.

    540797_10151889371170093_1713555845_n_zp

    test fit on the second battery. i used expandable foam to hold the battery still in the battery box since it liked to slide around

    539595_10151889368505093_1415586100_n_zp

    310023_10151889364575093_546850788_n_zps

×
×
  • Create New...