tbake223

thanks Joe, you beastly son of a gun!

thanks a ton, i appreciate it. Any chance you could make that for sub up and port back?

Heres a 6 inch Aero design giving me 13.02 port area per foot.. 2.16 cubes before bracing at 33.5 hz. http://www.flickr.co.../in/photostream

Need help SMD! dont know if i should run specs of 1.25 cubes or make a large box (2+ cubes). I wanna be moving some air and my question is what is too big and what port area per foot is too big?> will i get just as many Dbs off a box to specs? would like to be flexxin some stuff I want to run Aeros and be tuned at 32 hz, Any suggestions? thx

weigh them and look them up that way?

One is only giving me like between 5.5 to low 6's where i need 9 to 13 port area per foot. but i thought 2 4" aeros was for sure too much but thats what it said lol. I could do a 6" but the length would be like the same,,, around 28 inches. How big of a box is too big for a 10? the bigger the box the shorter i can make the aero

Hey guys i was looking for some input on my box for an RE SXX 10 d2. Running off a hifonics brutus 1200.1 in a Focus ZX3 hatchback. Been messing around with Torres and came up with some numbers. Right now i have a 15x13x32 with 2 4" Aeros at 28 inches in length. Giving me 12.31 port area per foot and im sitting right at 2 Cubes at 32.44 hz. The Displacement of the woofer is .14 and i threw in .1 displacement for bracing and might add some 45 degree corners. My question to you guys is... are 2 28" Aeros too much for this kind of setup? And is 2 cubes net too much for a 10 inch woofer running a little over the rms range (1000)? Specs call for 1.25 cubes at 34 hz. I guess i just want to know if this is going to tear my sub up, and also is it gonna be loud enough? would like to hit 140 is my goal, can also change out aeros if need be for that. Im new to box building and new to anything serious with car audio, any help would be appreciated. Thanks Sub up, port back firing I have the entire thing modeled up to spec in Solidworks please tell me what you think http://www.flickr.co.../in/photostream Is that the best position for the cutout? where the air would travel the longest distance is how i planned it Spacing around the ports okay? I have 5 inches between the wall and the entrance to the port