gotb00st

Ok thank you.

Hello im looking to upgrade my electrical in my truck to run a 2k watt amp with a stock 150 amp alt. For now I was just planning on getting a d3400 to replace the stock battery. Will this be enough for daily driving? I was planning on getting an alt and a xp3000 for the back, once i start working on my front stage.

Yeah I wish they made 12 inch version of the sp4. That would solve allot of issues. I thought of something I may try. I will post picks when I get the design done

Alright I built a box with the specs you gave me Joe. By any chance can u screenshot the Torres Calc with your port length? I can seem to match the tuning with the specified dimensions. Here's some pics of the setup im planning (Just to show u the limited space im dealing with). I wish I could just take out the back seats and wall it, but I don't want to do to resale purposes. Pretty much an exact replica of my trunk. This is with 3 xs xp3000 batts and a crescendo bc5500d (I may go with a dc 5k instead).

I originally wanted to use the shared port but I need to mount the amp and batteries some where without blocking the port. Although I suppose if i keep the 21'" dept that will give me that extra few inches to mount everything behind the seats without the port being to close to the hatch. Also what is a recommended distance to keep the port from the hatch, So the hatch wont be blocking the air flow.

Ok I spent like 3 hours designing a box on google sketch (first time). Heres what I came up with. How does this look for structure, area, port area, etc?

will the port be to close to the hatch like this? it will only be 1/2 inch gap. Plus i dont think I will have room for batts or amp with that depth. Other than that I like it.

Been messing with Torres calculator all night cant seem to get what I want out of it. I dont have alot of space for 2 fi sp4 15's but im sure we can squeeze it in. Not wanting to build a wall, just a nice clean system. My rear seats are on like a 15 degree angle so I have a little extra space on the floor. I have to be able to fit a dc 5k and 2 - 3 xs xp3000's also. I would like sub up, port back. I was thinking around 32hz. This is just for daily ground pounding, not competition. I listen to alot of dubstep, chopped and screwed, and hip hop. My dimensions are: Heights From floor to lowest part of roof 33 in From floor to rear seats 20.5 in From floor to to of head rests 28.5 in Width From wheel well to wheel well 45.5 in Depth From bottom of rear seats to hatch 34in From top of headrest to hatch 27in I was thinking of utilizing the extra space behind the rear seats for the amp and batts but I also dont want to push the port to close to the hatch. Any opinions would be awesome. Im looking at something in the lines of 25h x 45w x 22d. leaves me with 12.27ft3 gross.

Price request for 3.5k and 5k to 49506

Price request for 3.5k and to 49506