First of all, Hello I've read the boards many times, done much looking here, but now I've decided to register and post. Just to give people some background I'm an electromechanical engineering student (30, not a youngin) and have dabbled with car audio a bit in the past.
I've built a few boxes, gone through the design work and have a fairly decent understanding of audio/boxes, and a pretty good background in electrical.
That being said, it's been a few years since I've dabbled with audio so I'm a bit rusty on ..... probably a lot lol.
I've always wanted that truly kick ass system, but life has not taken me down a path of riches, and being a student I'm pretty god damn poor, so recently I caved and picked up a used, prefab, ported, dual 12" speaker box to just get a system in my car so I can finally have some decent sound.
I've had the Insignia NS-P2000 sitting around for probably 2 years or more now, and just wanted to use it (I HATE selling stuff that I bought)
I got the amp and everything finally installed this past week, and for a budget system I am absolutly amazed at the sound and sound quality of these subwoofers. Especially for only about 500W. I'm running the amp bridged, the speakers are 8Ohm and running in parallel so receiving 250W each.
There is almost no T/S params provided by the manufacturer and the product has long since been discontinued. The manual suggest a box of 48.6L presumably for EACH subwoofer.
My box is roughly 3 cubic feet, and the port is 4"x9.25". If I'm not mistaken it's tuned to around 30Hz.
Here is the problem (finally); At higher volume levels I can hear a chirping of sorts coming from the port, slightly high pitch, sounds kind of like a cat purring. I can stick my arm in the port and it will stop chirping.
As I understand it, this sound is possibly the sound of the air moving through the port too fast/port tuned too low?????
Is there anyway to correct this easily without pulling the box out and re-working a bunch of stuff, and without changing the tuning of the port? I like it tuned to 30Hz.