-
Posts
120 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by hayden55
-
-
It's being driven with an NS-1 @ 2 ohms -- so it's going a bit beyond where it "should" be driven. So yes, at a certain point you'll get a bit of surround dimpling -- it won't hurt the sub, though. The surround is the same geometry as the Z v.3 18" surround.
so what is the projected xmax going to be? Do you happen to know the weight and maybe the fs?
-
The X-8 will like the same boxes as the SA-8 v.2 -- we did test up to 1 cube but you will have to watch mechanics a bit on the full 750 RMS (clamped anyway).
Can it handle a zx1500? lolim pushing my 8v2 on zx750 (932rms birthed) in a tline and it gets warm to the touch but blows cool air for the past couple months. Definitely excited for this! can you say UPGRADE?! Haha -
Hi, i am upgrading batteries and ive heard a lot about xs power. What is a good battery i can stick in my 2006 ford ranger 3.0l. I am running a kicker zx750 right now pushing out about 930w rms. I will be upgrading to a kicker cx1200 which should put out somewhere around 1300w remote standard
-
I got one of 520 watts rms and takes it no problem. Pretty loud for one, but my loud and you're loud are 2 different things, I'm more of SQ than SPL
How would you rate yours at 520w on sq and spl? Ive got a Sa-8v2 with a hifonics hfi1000d (pushin 650w rms) and it sounds good but, it is my first set up and ive never had anything else to compare it to (and its in a 0.64ft3 box slot ported @35hz).
lockquote>If i was you i would buy two E-8v3's for about 80/ piece, run atleast 1000w combined, and in a ported box (good value for all of that). Heck i paid 145 for one v2 and 110 for the amp and I think it goes deep. Plus the fact that it blows my friends minds when i tell them i only have an 8.
The only thing i dont know is that the resonant frequency of the e8v3 is 51.9hz and xmax is only 12mm which reminds me of a sealed box rock sub. The resonant frequency of the v2 is 34.6hz and xmax is at 16.5.
Also if you havent already bought an amp Hifonics makes a great series of high powered amps called the "Brutus" line at 1200+
Thanks, the fs being so high was the main reason that I questioned how they sounded at lower frequencies. When I model things up in winisd, it usually seems that the higher the fs, the worse the lower response ends up. But I am still trying to figure alot of this stuff out and am well aware that I don't understand the relationship of all the t/s parameters and how they affect performance. If I go with the e-8v3's I may buy the hifonics amp, but if for some reason I end up with the sa series I would probably get teh aq amp.
Hifonics makes up to a 4200w amp which sounds like enough for any SA series sub.
-
I got one of 520 watts rms and takes it no problem. Pretty loud for one, but my loud and you're loud are 2 different things, I'm more of SQ than SPL
How would you rate yours at 520w on sq and spl? Ive got a Sa-8v2 with a hifonics hfi1000d (pushin 650w rms) and it sounds good but, it is my first set up and ive never had anything else to compare it to (and its in a 0.64ft3 box slot ported @35hz).
If i was you i would buy two E-8v3's for about 80/ piece, run atleast 1000w combined, and in a ported box (good value for all of that). Heck i paid 145 for one v2 and 110 for the amp and I think it goes deep. Plus the fact that it blows my friends minds when i tell them i only have an 8.
The only thing i dont know is that the resonant frequency of the e8v3 is 51.9hz and xmax is only 12mm which reminds me of a sealed box rock sub. The resonant frequency of the v2 is 34.6hz and xmax is at 16.5.
Also if you havent already bought an amp Hifonics makes a great series of high powered amps called the "Brutus" line at 1200+
-
What is the xmax on that? That will be cool to see a finished picture of the sub with a nice basket on it. You ll have to post it up when done.
-
wow 600-750 dang.
if the sa-8's can handle 1000w rms all day, i wonder about this one
It will be very strong thermally ; ahead of the current SA-10/12/15 woofers.
We are doing our best mechanically as well ; we spent alot of time and energy on the spider and the surround is also a new tool just for this driver.
is the xmax of the v1.5 different from the v2? sa-8. 16.5mm?
-
It will be very strong thermally ; ahead of the current SA-10/12/15 woofers.
We are doing our best mechanically as well ; we spent alot of time and energy on the spider and the surround is also a new tool just for this driver.
What will the xmas on this be? It looks good.
-
wow 600-750 dang.
if the sa-8's can handle 1000w rms all day, i wonder about this one
-
whats the power rating going to be on these?
I would guess somewhere close to the sa-12. 600w or so (sundown rating, so wayy more).
-
how is progress going jacob?
XS Power Battery for my 06 Ranger 3.0
in XS Power Batteries / Chargers! (and other stuff too)
Posted
Thanks man. Like 10 minutes after that post i measured and got 10x7x7 which is the size of the d3400. I ordered this and a terminal kit from crutchfield. Cant wait for whats to come!