Mr DeeBeez

Slowly making progress. Got one door almost done with body filler. Last coat of filler is drying now and then it will be ready for vinyl. Then to do it all again on the passengers door. Lol. Also, got two sets of soundqubed super tweets installed. Will have to wait till it's light out to get a good pic of those. But here's the one door thats almost ready for vinyl.

Why wouldn't you be able to? It was about 20 degrees when I did that door and it worked out pretty good. Does it not work well in the cold?

Still waiting on more ca glue so I can stretch the fabric over the passenger door. But I figured I'd start to fiberglass the drivers door while I wait. Got the resin laid down, cured, and then laid down the first layer of fiberglass. And I must say. I will NEVER buy a two part fiberglass resin ever again. The SMD Sunflash is so amazing. Can work on it however long you want, bring into sun, and it's set! Can't wait for these to be finished and playing!!!

One door all stretched and ready for resin!! One more to go!

Thank you will be stretching the fabric today and maybe laying down some resin!

Made a little bit of progress on my doors today. Got the rings all mounted and glued to my panels. Test fit was very tight. There's barely any room behind the speakers, and between the speakers and seats. But I think I'll be able to get them to fit. Too late regardless! Now just gotta find a good way to stretch the fleece. But I'll save that for another day.

Yeah I was pretty bummed. Was so excited to have bass again after about a month. At least I can get more reconing experience. Lol. What it seems like is one of the polarities of the coils were reversed. I put each coil on a dmm and they were all fine. But thinking one was reversed. Wasn't anything I did wrong. So he said he will make a new one for me. On a positive note, it was quite loud with 1 working sub. Lol Depends on how fast I can find some hdc4 motor and baskets, and get recones for them. Plan is 4 of the custom hdc4 15's on 4 3500's. I have all the amps, two of the 4 subs, got another Q4.90 for mids n highs, and I got 3 more sets of mids to put in. Next step is start on door panels for 4 6.5's in each. Got everything to do that, so may get started on that soon excited to try the sun flash

Well, one of the recones only lasted a day something was reversed in the coil or something. Cut the recone out and prepping for a new recone that will be made soon

A little bit more power came in the mail today . Two more Q3500's. So I'll eventually have 4 total

Should be playing by the weekend! Got my spl audio recones today. Will look pretty badass with the carbon caps too! Also got some more power that will be here tomorrow

Good advice above. You I'll need to run new speaker wire from your amp, to your speakers. The only thing going to your amp from your head unit is the RCA's and remote turn on.

Got 3 more sets of mids for my doors so I'll have 4 mids in each door, a set of tweets in the dash, and two sets in the A pillar. Can't wait! getting prepared to get loud soon

SKAR AUDIO FTW 1000.1 CLAIMED

SKAR AUDIO FTW 1000.1 CLAIMED

SKAR AUDIO FTW 1000.1 CLAIMED

2 mechman 240's

No I didn't get a chance to re meter. Blew one before I got to it. I'll Meter both drivers and passenger side when I get my recones in. And thank you! Love the look!! Can't wait till I wall to get room to display the 8 spot one looking at buying a third car for a daily driver. That way that frees up my blazer to go all in. B pillar with 4 hdc4's and 4 3500's is the plan. Won't become reality for a while. But it's coming sooner or later

Got the wire tidied up a little bit. Made some panels to cover up under the amps. Left side looks a little like a rats nest still it's hard to organize 9 runs of 2/0 and like 10 runs of speaker wire.. But right side looks pretty good. Can't wait to get my recones! Going nuts without bass

Awesome!! Love my 4 spot. Can't wait till I wall, and can find a nice spot to display my 8 spot. Badass man!!

Got my welding cable today. Got the two runs ran under carpet. Just need to finish fusing and joining up to batteries. Looks pretty nice under the carpet. Like the look of 6 runs

Added some SMD goodness adding two alt runs to the back too once my 50' of 2/0 comes in.

I'll give it a try. Thanks!

small update. Just ordered two recones from corey splaudio dean