BlockShaker

The person I am building this system for wanted a factory look in the interior, but didn't care about the trunk space. So here is the equipment I came up with: JL Audio Cleansweep Peripheral Volume Control (For Subwoofer Volume) Boston Acoustics Pro60 Boston Acoustics Pro50 PPI-PCX4125 PPI-PCX2400 RE Audio SE 10 D4 (2) 2.5 cuft Ported Enclosure tuned to 34hz Kinetik HC2000 All Wiring Stinger via Darvex.com

The seats fold down.

He wants it to sound lound and clean.

I'm getting ready to build an enclosure for a 2008 Chevy Malibu. The owner wants to go with Fi Subs since watching them on this site and Youtube. I've never worked with these subs before so I need some suggestions. He wants to go with either a 12" BL @ around 1600w RMS or 2 10" SSD at the same wattage. All in all he's working with 1500 to 1600w RMS @ 4 ohms. The enclosure will definitely be ported plus the trunk entry is small.

Here is one of the subs playing.

Here is one of the subs playing.

I have the build on another page. Here are the vids.

Here is the first vid. Its take forever to upload these.

The guy i'm buiding it for is from Canada so I had to wait until this weekend for him to come and finish the job. Here are the rest of the photos and I took a couple of vids of what these subs can do. This is what they are in now.

I have custom A-Pillars in my Tahoe and that seems like a good price. I would charge more if I had to make them identical to mine. Its the time it takes fabricating them and they are labor intensive as well.

The guy I'm building it for wanted something nice and simple, plus it had to pound.

Thanks for the comments. I should have them installed by this coming weekend. They will be powered by a RF Power T10001bd. The performance verification certificate measured it at 644 w RMS @ 4 ohms, 1031 w RMS @ 2 ohms and 1436 w RMS @ 1 ohm. These will be wired at 1 ohm along with a Stinger battery in the back.

This is a box I am building for a 2001 Lexus IS300 It will house 2 12" RE Audio SE D4 Its going to be 3.5 cuft @ 34hz Thats an 1.25" for the face. 3/4 and and 1/2 MDF

Your diagram works fine. Just leave the 87a empty. I just do it the opposite way. Make sure you fuse it.