99vic

i have the copper ones. ill just go buy some more

works for me

i am soldering ( may not be correct spelling) them in

im trying not to. what are those called anyway?

oh shit the whole time i have been running my other kinetik its been grounded to the back

i would but my fat ass didn't buy enough ........what ever the hell you call the things you put on the end of the wire to screw it down :mad:

no just the pos. should i run a neg also?

1 run from front to back batt, and from the batt to the amp, ground to batt, batt to amp. all 1 run.

I HAD TO OF MESSED UP SOMEWHERE.

unless i did something wrong? i ran all of my wire cut everything for big 3 cut the wire for the kinetik and i still have 60 feet of wire! WTF!

thanks i have always been into car audio but i have also always had to pay shops a shit load of money i use to go to fair oaks electronics in sac to get my shit done though. but looking at the crazy shit on here i want to try and do something with my car.

really i just want to do this hoping to learn something. everyone is talking about how fun it is.

idk. i messed up somewhere on the measurements.

SHIT! :mad: ok when my wife gets home ill measure it again.

thats the trunk space i have that i can use

46" from left to right x 41" high x 32" from back and thats if i even measured it right

you said 45 what is that. shit i dont even know how im going to build my box i dont have a design or anything. maybe i i should figure that out first.

that i can probably do.

i have no clue on how to even try to uses resin thats that fiberglass stuff right?

i went over on the wire ? i have to do the big 3 and wire my whole system think 150ft is to much

shit now i have to go back? is there anything else i should get that i didnt list? i got the drill bit to pre drill the holes also is it trus thyat you can take the screws out after the glue drys?

what size screws should i use ?

this is my first box im going to try and build so ill probably end up going back for more the screws are 3/4 wood screws i hope i got the right ones. i can get pics but i dont have a photobucket account.

ok guys im back.... i was wrong on the front battery i could only fit a kinetik hc1800 so i got that i got the hc2400 for the rear and picked up 3 rolls of 50 ft 1/0 wire for my big 3 and amp hope that will be enough. i got 2 cascade door kits dk1, i got the brass terminal things for the end of my wires, got a anl 200 amp fuse and a 300 amp fuse didnt know what 1 i needed. i ran to home depot and got 4 sheets of 3/4 inch mdf that should be enough for my box and all of my mistakes. i got 2 16oz bottles of elmer s probond professional strength wood glue, a big box of screws, a router a saw and a sander. hope i got all i need.

thanks alpine im going to get the stuff now