99vic
-
Posts
9992 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by 99vic
-
-
idk i guess if there hittin then i would think there fine......but hey this wireing stuff is my weakest point in the audio world! so idk for sure but....like i said i always thought D1 and D4 could be wired to 1ohm so........
you made it sounds right
hopefully you are right -
i always thought you could wire D4s to 1ohm and then D1 can be too
i hope because if not that means my subs are messed up right? they still pound hard. even harder with my eq in
-
i have my dual 4 ohm 15" alpine type r subs i had a person tell me they cant be wired at 1 ohm i called alpines tech support the guy there told me i couldnt drop them to 1 ohm only a 2ohm load. i got a dmm touched the leads to the wire it read 1.2 on both subs. is there something wrong? each coil is - to - +to+ and 1 wire from each coil then both subs connected together at the amp.
-
ill check on them thanks guys
-
i have, a local shop use to sell them, but they are overrated (even the shop owner told me that) and theres no way u will see anything close to 4k out of that amp
i was thinking the same just thought i would ask i found one for 259 + 14 shipping. thought it was to good to be true
-
oh shit
didnt see it.what about quantom http://www.americanthunderaudio.com/Produc...aspx?id=3567276 ever heard of this
i need something 2ohm i dont think i can drop 2 4ohm subs to 1ohm
-
might be, im not sure, however Crunch does have a nice 3000 watt rms amp that does rated power plus more
do you know the model #
-
they are both made by Maxxsonics
wow. so is it like the lowest model of that company.
-
is it true that crunch is made by hifonics ?
-
That would explain the three folds.
I thought it was some sort of a T-Line.
i wish i knew how to build a tline that would be insane
-
Thats a pretty expensive EQ, It would be worth it just for the EQ, but know that the memphis will put out half the power.
that eq looks pretty good, i dont know much about memphis ill just pass on the amp and have him give me some cash i guess
-
but I cant imagine its not puttin out over 1000 watts. Which honestly the cheaper memphis probably wont do rated power either. What kind a money you lookin to spend on an amp?
i have a guy that wants to trade my amp for a zapco SX-SLII and that amp
-
I cant find any info on your audiobahn, but it probably is rated at 2300 max, which is totally different then being rated at 2300 watts rms @ 1% thd
audiobahn says its 2400 rms @1ohm bridged
-
why do you want to go from a 2300 watt amp to a 1000 watt amp? Typically the audiobahn amps are very overrated, but it cant be that far off. The 16-PR1.1000 is memphis cheaper line so I wouldnt say that you would gain anything. Unless the ratings on the Audiobahn are totally bogus. Does it not sound loud enough right now? If you want more power, there are alot more options
everyone keeps saying its not pushing close to 2300 watts.
-
its saying its 1000 watts is that rms?
-
-
memphis or audiobahn ? are you for real ?
i just want to know if it will push my 2 15 type rs
-
Memphis 16-PR1.1000 is this better than my audiobahn hcx2300
-
even if you show a vid. if they are not set with a DMM they are not set right
i pound the shit out of my system everywhere i go and still haven't blown my subs.ive had it looked at by 2 shops and they say it looks good
-
your post reminded me to do this. nothing personal but it just drive me crazy. i had pretty bad OCD so everything i do has to be perfect for the most part. that is the main reason i got into car audio. i like taking nothing (wood) and turning it into something (like 160 db's)
if you need to see a vid of where my adjustments are ill be more than happy to show you.
-
you must bee talking about me. because you posted this right after i posted the vids of my system saying my gain was a little more than half way up why is that so terrible?
-
yea i just gave 4 of them away. I had no use for them at the time. now i wish i didnt give them away.
i have never had to use anything like this. i had a wine but found out one of my rca cables were messed up.
-
It is for Zapco but can be used on nonzapco products too.
What it does is it converts an analog signal into a Balanced signal, thus eliminating any floor noise from signal. If you dont have a Zapco amp at the other end you will need 2 symbilink transmitters to convert it twice( one at the source from analog-to-balanced, then at the amp balanced-to-analog).
Really only reason to go balanced is to get rid of noise, if you dont have noise you are wasting money.
btw i make Symbilink cables(just the din cables)
somebody gave it to me i didnt know what the hell it was neither did the guy. i figured what the hell its free im sure one of the guys on smd would know what it is
-
so what do you guys think? the gain on my amp is a little more than half way up and the knob up front was half way volume at 28 i think.
hopefully you are right
Alpine 4ohm Subs
in General Audio - Can't find a category for your question? Ask here.
Posted
i have 2 GREAT
i thought i messed something up.