-
Posts
2362 -
Joined
-
Last visited
-
Days Won
19
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by CstrokerV
-
-
Me !!!!!! Only songs I didn’t is when they played below box tune...
-
The first one looks to be Steves amazon store... not sure though it has Steve Meade designs for shopped and sold ... not sure what’s up with the other 2
-
That method does not work Tony already explained why... probably in that guys comments
-
For number 2 Besides the sub level 0 is zero volts to the preamps so it has to be up when he’s doing the dd1 unless he’s talking about the bass boost level on the deck which I think he isn’t ..
-
Set the subwoofer level at max or minimum half way and leave it there you don’t mess with that after and must be set before you test deck also ..if it’s a bass knob throw it away if it’s a gain knob all the way up when you set it
-
2 hours ago, CstrokerV said:
How come you totally ignores everything people asked and commented?
Just because there was more people in here trying to help...and then boom nothing .but another reply from you not saying anything about the last posts
-
How come you totally ignores everything people asked and commented?
-
7 hours ago, Ron36 said:
I was so impressed with the SA line that it made me a Sundown fan for life. Great quality for what they call a starter sub.
Nephew had a sa 15 in a ported box it was alright didn’t wow me or anything maybe it needed more power he was only running the rms... I built the box to specs so I don’t know... I personally wouldn’t buy them
-
17 minutes ago, Audiohz said:
I'm at 5.34 cube total net for two subs 2.5 each
do a fiq 18 on that 2000 watts sealed just seal the holes and make a new top if you have enough area to have an 18 lol it can be a 2.5 to a 4 cubed box hell it can be 5 cubed ported if you could make an external port lol
-
There’s a few 18s that can be in a 5 cubed sealed box could always look into that lol
-
Ahhhh might hear a difference... it might not be a Huge difference though...
-
If you are changin because you think you will be louder I wouldn’t bother...
-
Uhhhh ok? So do 2 12s ported then or one higher powered 15 ported then if you want low end
12 minutes ago, Audiohz said:Yes they are sealed, really dont wanna change boxes. I'm personally after low end more then after spl numbers.
-
Dd-1 is to match preamp voltage from deck at 1% thd to the amp... ohm load is irrelevant... use the 0db track for your mids and highs amp and you should be fine with the extra watts for headroom the amp doesn’t produce that on music all the time anyways
-
92-96 one of those years walled RF punch. power, something 15’s in a montecarlo.. was first one got me more interested into car audio well audio period then I already was... but the two high powered ones I won’t forget are Boyd’s Jeep and the Canadians can’t remember his name lol truck both at world finals 2011
-
Lol never mind misread or something think I need to go back to bed
-
2 minutes ago, ToNasty said:
Them quality dc subs 😂
Guaranteed it was to user error and that amp
-
And the amp could of been still clipping at that voltage you set at that 1200 watts... and one sub going is not unheard of due to clipping with the other subs being fine. if that amp is only capable doing say 800 rms of clean power and you set it to 1200 rms then you clip the amp to hell and back ... box could of been an issue also... burnt coil is rarely due to manufacture defect and to user error
-
If you do the measuring one and then strapping you need to do both amps to see what one distorts first and put that one as master
-
get the 12 elites.. either way you won't go wrong with either
-
That amp is junk like I said before it’s not doing 2000rms..if you don’t believe me send it to bid d wiz ... . if you did the math the way you did for 2k no you didn’t do it right and no 49 wouldn’t of been ok and even with good amps it would of been better to go lower the higher so shouldn’t of went higher then the 48.9.. regardless...
on a on a different note it’s looks like it’s only a 2 ohm stable amp you can still pick them up new at for $230
-
Which dd1 you have? If you are measuring the deck through the amp I don’t think you will get a signal until the. Dd1 sees enough Volts and if the amps all the way down it might not have enough Volts from the deck unplug the rcas and plug it in the dd1 and set it that way first then amp
-
the factory unit doesn't even show lines?... if it has no volume indications at all not sure how you would be able to tell after you set it
-
Yeah it’s possible I had the same issue with my brothers deck since they were factory speakers we just Set the rcas at max and didn’t worry about the factory stuff
D2400 issues
in XS Power Batteries / Chargers! (and other stuff too)
Posted
That’s where all mine rest after sitting.. I didn’t even charge them before use like the manual says too