benz280se

what up folk i have this rf p8002 for a spare amp, hasn't seen much playtime. a few scratches here and there but works fine. i have a few bills that have put me in a small hole. i don't have ref's but if you are truly interested pm me and i can call you, email more pics whatever i need to do to get this sold! asking 200+shipping obo i have a paypal account so transactions will be secure and easy. also have kove audio line driver with original box for sale 30.00 shipped Output Power at 14.4V and 1% THD+N (CEA-2006): 2 x 200W @ 4 ohm 2 x 400W @ 2 ohm 1 x 800W @ 4 ohm bridged S/N Ratio: >80 dbA @ 2 Vrms IM Distortion (IHF): <0.05% Freq. Response: 20Hz ~ 20kHz (+/- 0.5dB) Fuse: 3 x 40A Dimensions: 17.7"x 11" x 2.4" (45cm x 28cm x 6.1cm) Manufactured in 2004-2005

yeah i guess your'e right. everytime i go home on leave i feel my brain start to turn into oatmeal.

that reminds me of this other car i saw. guy had that burberry pattern not only painted on the car but had his interior stiched the same. i wish i had taken pics but those idiots wouldv'e thought i was liking thier crap! lol and the next guy that pulled up next to me with that crap i politley rolled down all my windows and showed him what two sets of 6.5 components and two twelves on memphis mch1300 sounds like....mmmm pure sexx! i love dirty looks when your shit gets drowned out. especially when you know that i do it on pupose!!!!

audiobahn 2200hc installed this in a buddy of mines truck the other day on two cerwin vega hed 15's and i must say i was unimpressed. it was ok it slammed to say he got it for 100 dollars but i could tell just by listening he was not getting or going to get anywhere near 1600 watts it promised maybe 700-1000 if he's lucky. and he didn't want to buy 0 gauge wire so 4 gauge for power 8gauge for speaker. anyway less then three days later he had to buy new alt, and battery! course i think they were about to go out anyway. when i tuned his system i didnt use a dmm or anything but i only turned the gain to just under half, no boost, and crossover at 50. to me still sounded a shade over bleah let's hear it for audiocrap!! yay

well i went home on leave to new orleans, and since being back in the states for a year i have gotten used to the hidious trends that have started from my bros in the south, don't like it just got used to it. you know donks cars, and cars that have mad stickers on them to look like theyv'e been sponsered or nascar stickers. it's too funny to see a "gangsta" wif gold fronts in a monte carlo made to look like Dale Earnhardt, or my two personal favorites: bright yellow 93 camaro on 22's with the original wolverine sticker from front to back, or the green crown vic on 24's with holiday inn written across it lol i thought it was a cab!!! anyway the new source of my irritation had to be when iwas sitting at a stoplight and turned my system down so's not to disturb everybody and i kept hearing music that sounded like it was coming from a carnival pa speaker. i noticed that the sound was coming from this guy behind me. i thought man his ears must be hurting with pa speakers in his car yuck! then he passed me and his windows were up W T F ?!?!? the sound was coming from his wheel wells he had speakers mounted there so you could hear what he was hearing 80 ??!! then i thought maybe it was just this idiot but the more i drove through new orleans the more people i heard with that setup. white dudes, blacks, even hispanics got 'em. what the hell is going on? am i just getting old? or is the south just getting more and more f'n STUPID?

i'd keep it, just don't install it for a few weeks just to see if they realized thier mistake. the shady side of me says if someone put the darn thing in the box and the onvoice only has one listed...as far as i'm concerned i only got one f'em. and from my experience in retail so much stuff goes out of a store at a time the only way they'd know you had the particular item that was missing was if the stocker for some particular reason knew your box from the hundreds that go out or your invoice says you got two and only paid for one. say it again f'em lol

don't get hung up on class of vehicles and prices, you ever stop to think maybe he just likes toyotas? and if money isn't a big factor he's going with what he likes not what suits a particular price class. my .02

search for nin. on the website is a link that emails you the direct download of his new stuff. there is also remixes that can be downloaded also. the sh!t rocks!

yeah i am definatley going with 1/0ga but right now my truck was loaded with 4ga and i spent a ton of money upgrading everything else so the switch will be easy. any of you guys use a 0/1g to 4g reducer terminal? the guy at the local shop suggested one, but isnt that defeating the purpose of upgrading in the first place? makes me wonder why memphis only used 4g terminals for this amp even though it's pulling all that power?

thank you for all your info folks. and for the link to the twelve volt.com lotta good info on there.

i really dont like being an internet smartass but with this long answer you gave, it might have been easier to do this 100a=bad, 160 or larger=good. less space, question answered, no aggravation

thanks for your replies right now i am using 4 gauge wire since i had it already in the vehicle, and the terminals on the amp accept 4 gauge. when i get more money and time i'll add 0 gauge, but in the meantime, i will get a 160a fuse then. thank you guys a lot.

can somebody please just take two seconds and say if the 100 amp fuse is big enough or should i go up?

hey folks i just recently installed my memphis mch1300, and it's a really good sounding amp. i'm a little confused about what outboard fuse to run. it uses 6 30a fuses and i have a 100a fuse between the amp and battery. is the 100a fuse big enough or do i need more? spec sheet 5-Channel MClass Series Amplifier Class-AB / Class-D Hybrid Amplifier Compact Aluminum Chassis with Custon Black Pearl Finish Gold Plated RCA Connectors Full MOSFET Design Fully Variable Crossover: HP/LP (40 Hz - 6 kHz) (Channels 1-4) Fully Variable Crossover: LP (50 Hz - 250 Hz), Subsonic (20 - 50 Hz) (Channel 5) 4-Way Protection Circuitry Platinum Finish Wire Connections Accepts 4 Gauge Power and Ground Wire Optional Wired Remote Gain Control RMS Power Ratings: 75 watts x 4 chan. / 300 watts x 1 chan. @ 4 ohms 115 watts x 4 chan. / 600 watts x 1 chan. @ 2 ohms 1100 watts x 1 chan. @ 1 Ohm (ONLY CHANNEL 5 IS 1 OHM STABLE!) Adjustable Input Sensitivity: 200mV - 4V Dimensions: 25.81" L x 7.6" W x 2.4" H 1-year Sonic Electronix warranty Amplifier Specifications: Amplifier Class Channels 1-4: A/B, Channel 5: D Number of Channels 5 RMS Power (4 ohms) 75 watts x 4 chan. + 300 watts x 1 chan. RMS Power (2 ohms) 115 watts x 4 chan. + 600 watts x 1 chan. RMS Power (1 ohm) 1100 watts x 1 channel for the 5th channel (Channels 1-4 Not Stable) Bridged RMS Power 230 watts x 2 channels Peak Power Output N/A Minimum Impedance Unbridged 2 ohms (Channels 1-4), 1 ohm (Channel 5) Minimum Impedance Bridged 4 ohms THD at Rated RMS Power 0.03% Speaker Level Inputs No Preamp Outputs No Built-in Crossover High-pass (HP), Low-pass (LP), Full (AP) High-Pass Crossover Frequency 40 - 6000 Hz Low-Pass Crossover Frequency Channels 1-4: 40-6000Hz and Channel 5: 50-250Hz Subsonic Filter 20 - 50 Hz Signal-to-Noise Ratio 95 dB Channel Separation N/A Bass Boost N/A Bass/Gain Remote Optional (Memphis 16-MCRG required and sold separately) Fan Cooled No Fuse Rating 30A x 6

i don't understand why anybody would want an amp that says it puts out one thing and it actually does something far less; 1300 out of 2000 is one heck of a drop! i am not being a smartass or trying to start an internet fight but thats like buying a 2008 mustang cobra with an 89 escort engine under the hood lol. dont get me wrong he may be happy with a power acoustik but why not suggest some good amps that do thier rated power for that money? AQ1200, sundown1000, cadence atx1000,rf8002(underrated) all of these can be had for under 250! plus theres a guy here selling 2 rf1000 for 250 shipped!

dude for 245 you could have a sundown 1000watt amp shipped! http://www.db-r.com/sell/store/index.php?productID=147 go there buy NOW!!

my .02 i dont think it's so much the sub; but the attitude that someone would rather destroy something good than give it to someone to use, and find something else to destroy.

what up im lookin for a jl 500/1. doesnt have to be perfect or pretty just as long as it works!

well think about it, if it gets that loud and sounds that good underpowered think of what it will do with reccomended power and more! i have two ssd 12's only getting 6-700 per and it hurts. just .02

well idk about dc, but just bought some fi ssd 12's and couldnt be happier. i have managed to mess up my trunk lock dislodge my rear window(it leaks now), and my rearview mirror is loose. and they are underpowered (about 6-700 per 12) in a box that is just bare minimum 1.9 per 12 tuned to 33hz. i tell people im running fi and their like who? then i pop the trunk play something and after they pick up thier jaws the want to know where they can get some! i know i hurt some guys feelings at show this past weekend, he was blasting his kicker system in an ugly donk caprice and i popped in a cd in my 74 benz let the fi's knock and people walked away from his car never to go back again Bwaaaahahahaaa! i have become a fi man! so should you

thanks man!!!

hey where can you get the sundown for 240? the cheapest ive seen is 300. you got a special "hook up"? let a brotha know i might be in the market for one.

mikes stuff is still the best don't confuse the music with the man. i mean mike tyson was the best fighter in his time was he a stupid f**k, well yeah but that didnt stop him from bustin heads.

hey do you have any chips for the 3.1 unit mine has the stock one kinda interested to see if a different one makes a difference or not. if you do how much for one?

with this amp it can go four channel out with only two rca's in. you would need the other rca cables hooked into the other channels if you wanted front and rear fade capabilities and a little more stereo seperation. so its just on what you are planning to do. hope this helps