Search the Community
Showing results for tags 'MTX'.
-
MTX1004 (3) pieces, 500x2 or 250x4. 0 gauge positive and ground inputs ($450) for all.
-
First up we have an Alpine CDA-9887 very well taken care of unit, if you don't know how good it is well you can read the factory specs here; http://www.alpine-us.../view/cda-9887/ This unit just came out of my own car on May 5th and works beautifully! This unit comes with the mounting cage, trim ring, new iPod cable, wire harness and remote. Asking $250 shipped WITH insurance. Next up we have a Phoenix Gold ZX400Ti amplifier, rated at 100x2 @4ohms and 200x2 @2ohms, with 400x1 @4ohm mono. These amps are just plain goodness, this one has a small amount of rust on the top edge as you will see in the photo, but this has no effect on the amps performance. This amp was fully bench tested and worked very well. Unfortunately PG's website does not have any information on their older amplifiers the ratings I have supplied here were from researching other amps of the same model online. Asking $135 shipped with insurance. Next we have a Panasonic CQ-DFX301U CD player, this unit is in pretty decent shape bench tested fine including the internal amplifier and all pre-outs. Great for a work truck or putitng in a car your selling or whatever its CHEAP! Asking $35 shipped. Next is a Kenwood KDC-X811, this unit is NOT working properly, my bench test showed the following; the faceplate flips just fine both directions, however that was the only function I could get out of this unit. This unit could be used for parts or repaired if you are that good with electronics. Here is some info I found on this unit; http://www.crutchfie...n-KDC-X811.html Asking $35 shipped. And finally we have an oldy but goody MTX Blue Thunder PRO275, this amp is NOT working properly. When connected to my bench it will power up but puts out a distored signal only over the RCAs. Again just like PG there is no info I could find on the MTX site on this amp, however here is what is listed on the bottom sticker of the amp which is intact fully; N-Channel VFET Amplifier, 37.5watts x2 @4ohms stereo, 75watts x2 @2ohm stereo, and 150watts x1 @4ohm mono, 280watts @4ohm mono at 14.4V. Serial # 477GB0499 and MADE IN THE USA! Asking $45 shipped. Well that's it for my first Classified on this site ever, PM or respond here for these items. Thanks
- 8 replies
-
- Alpine CDA-9887
- MTX
-
(and 3 more)
Tagged with:
-
So i was doing my Build on my 2001 Chevy Cavalier, but it was rudely interrupted by a lady pulling out in front of me while i was doing 55. Keep in mind im only 19, and i work in fast food, and go to college full time, and i do pay all my own bills so please dont give me crap about my setup, im trying to build up. i Started With a Completely Stock Caviler Added a Neon Cluster Gauge, a Kenwood Deck, and 12" MTX 6000'S and a Bazooka ELA3002 and heres a walk through of my first Setup, then i decided that i wanted something louder Then i upgraded and bought a new Deck Then i decided that i wanted something louder so i went out looking and i found 2 12" MTX Thunder 8000's and they were running on a Kenwood 1000w amp, which was only giving the subs roughly about 250/500 max. They started off in a sealed box, so i did some research online, and found out about the conical horn box, so me and my friend built a conical horn box for the subs, and mounted the amp on the size. i purchased an earthquake pH2200 For quite a bit of cash(for me), and 4G Wires aswell and i had the amp mounted on the back seat and, was going to rewire everything later that day, but the box, with the 8000's flew into the back seat brokke the amplifer and the backseat down. so in the accident i lost everything, except for my 2 week old deck, or at least i thought but that ended up being broke to. So Now i have a 2000 RED VW Jetta, and i have purchased a 12 MTX 9500 Superwoofer, its in an enclosed box, and its currently on a 600w kenwood old school amplifer. i will post pictures soon, and my deck is a JVC-KD5050 idk why its distored but u get the picture the sub weigths 60 pounds, and its a 12"
-
What's up guys? Got my CV about 4 mos ago and i love this car! I don't have alot of cash to burn on sounds so i'm gonna make the best of what i have. The plan is to upgrade my alt and add a battery as well as build a bigger enclosure for my MTX 7500's and amp rack for my 1501D. I just modified my cup holder today to fit my iPad on it. Still have to sand and paint it to look good. I wanted to mount it in a slide in over the radio hole but didnt want to draw attention from the fuzz.