Search the Community
Showing results for tags 'v3'.
Found 3 results
So i recently got a pair of the new sundown E8 v.3 subs, dual 2 ohm. I've been messin around on winisdpro and i've come up with a parallel tuned 6th order for these babies with the objective of higher efficiency at higher freq over a conventional low tuned ported box. These woofers also appear to be highly oriented for ported enclosures according to the EBP so i assume they wont do too bad in a 6th order. *I'm curious to see what other more experienced bandpass experts have to say about my design in terms of its port placement, cu ft ratio, port area, whether its COMPLETELY WRONG BRO!!#!, ect. *I don't care for responses like "ur gonna blow ur shit up" and "fuck 6th orders" by people who must have been abused by 6th orders in their early childhood, im curious about sixth orders and i wanna start somewhere so don't even bother brocephalopod. *really just lookin for new knowledge and advice on 6th orders with 8 inch woofers which seem to be quite rare. -------------------here's teh data: - front chamber is .53 cu ft tuned to 66 hz w/ 16 sq in port area - rear chamber is 1.49 cu ft tuned to 36 hz w/ 24 sq in port area - subs will be inside rear chamber firing into front chamber - ports are facing opposite directions, if looking straight on at woofers, rear chamber port opens left, front chamber port opens right. (donno if this matters, i just didn't want the two ports directly next to each other so i put em on opposite ends) heres a link to my sketch up download: http://sketchup.google.com/3dwarehouse/details?mid=5bcfd206989351a721e84b8eebc8573c the gain in winisdpro showed as following from 30-80 hz 5 hz interval with a 25hz butterworth infrasonic filter and 100hz butterworth lowpass filter enabled: 30 (-8.1db) 35 (-.52db) 40 (1.2db) 45 (1.7db) 50 (2.4db) 55 (3.2db) 60 (3.6db) 65 (3.3db) 70 (2.4db) 75 (.89db) 80 (-.9db) tks
Like the title says, looking to get a D4 preferably but may consider D2 Must be v2 or v3 Will be shipped to 55605, $200 or under Thanks. EDIT: I know they're $165 brand new off their site, they haven't been in stock since I've been looking and I've had no luck contacting them, hence this.
Hey everyone, I will be picking up an E12d2 V3 in the next week or so. They look pretty mean. This will be my first Sundown product and my first self-install. I previously ran 2 15" Rockford Fosgate Punch HX2s in my suburban. I'll be installing the E12 in my 2012 TC. I'll have it wired at 1 ohm and feeding it 600w rms. Think Sundown's page recommends a 1.75 cu ft ported box. So far I've only been seeing setups with multiple subs, so I don't really have much to go off of in terms of what to expect. Since I'm limited on space in my TC, I wont be running multiple subs or a giant box. Does anyone have or has anyone seen a single E12 perform in similar setups? This is sort of a budget install, so I'm not interested on upgrading to the SA series even though it's "only $100 more." If I still had my suburban, I'd consider it (or even the X series) due to having a lot more space to work with. But I don't. Any recommendations on box size, placement of enclosure, photos of your setup, or just reviews on the E12's performance is greatly appreciated. Thanks