Hertz_dont_it Posted March 26, 2011 Report Share Posted March 26, 2011 i was gonna run with 1 12" lvl 2 dc but since that thought i have come upon a even better deal.. 4 10" MTX jackhammers 400w a piece and two jh300 amps. i would like to have a built in port (not a aero port) if that makes sense. but im thinking now that i will have to do internal aero ports but i need some help designing the box im posting the link of the sub's and amp's (not im not paying retail for the subs or amps lol) BTW the demensions i have to worth with are: 31" from back of hatch to back of seat: 31" at narrowest from side to side: and 15" from floor to roof(so i can still see out back window) car is a 1994 toyota celica hatch stock everything so far until this summer http://www.mtx.com/caraudio/products/subwoofers/JH45-Subwoofers.cfm http://www.mtx.com/caraudio/products/amplifiers/JH300_amp.cfm please help thanks im excited to get this done Quote Current system:Front stage: Alpine type s 6.5No rear:Alpine type s 6.5headunit: alpineAmp: Jbl bp600.1 Sub: Alpine type x 12 dont know much about them. Found a "FLUX" Capacitor on ebay. If I add this to my system, can I really travel into the future? And how far into the future? That probably all depends on how I ground it though, right?Dude dont even waste your money on capacitors get a second car battery preferably a kinetik or stinger or any other car audio battery use the battery that is correct for your systems true rms wattage do some research on the net for this. Go to kinetiks website they explain how to pick a battery from thier site that fits your system. Link to comment Share on other sites More sharing options...
94retta(219) Posted March 26, 2011 Report Share Posted March 26, 2011 You have plenty of room. Quote BUILD LOG Link to comment Share on other sites More sharing options...
Hertz_dont_it Posted March 26, 2011 Author Report Share Posted March 26, 2011 alright i kinda figured but i wanted to make sure now i just need some one to google sketchup or something a box for me plox and tanks Quote Current system:Front stage: Alpine type s 6.5No rear:Alpine type s 6.5headunit: alpineAmp: Jbl bp600.1 Sub: Alpine type x 12 dont know much about them. Found a "FLUX" Capacitor on ebay. If I add this to my system, can I really travel into the future? And how far into the future? That probably all depends on how I ground it though, right?Dude dont even waste your money on capacitors get a second car battery preferably a kinetik or stinger or any other car audio battery use the battery that is correct for your systems true rms wattage do some research on the net for this. Go to kinetiks website they explain how to pick a battery from thier site that fits your system. Link to comment Share on other sites More sharing options...
94retta(219) Posted March 26, 2011 Report Share Posted March 26, 2011 Why dont you do it yourself? I mean make your own design... Its kinda what the whole websit is about, makeing it your own. To find out the box size you LxWxH then divide that number by 1782 and thats your volume, then use a port caculator and go to town. Quote BUILD LOG Link to comment Share on other sites More sharing options...
Hertz_dont_it Posted March 26, 2011 Author Report Share Posted March 26, 2011 (edited) Why dont you do it yourself? I mean make your own design... Its kinda what the whole websit is about, makeing it your own. To find out the box size you LxWxH then divide that number by 1782 and thats your volume, then use a port caculator and go to town. i understand that kinda lol but i want it made to the exact sub specs so i can pound them EDIT: wait so if each sub is 1.45³ for ported then what do i need to do? Edited March 26, 2011 by Hertz_dont_it Quote Current system:Front stage: Alpine type s 6.5No rear:Alpine type s 6.5headunit: alpineAmp: Jbl bp600.1 Sub: Alpine type x 12 dont know much about them. Found a "FLUX" Capacitor on ebay. If I add this to my system, can I really travel into the future? And how far into the future? That probably all depends on how I ground it though, right?Dude dont even waste your money on capacitors get a second car battery preferably a kinetik or stinger or any other car audio battery use the battery that is correct for your systems true rms wattage do some research on the net for this. Go to kinetiks website they explain how to pick a battery from thier site that fits your system. Link to comment Share on other sites More sharing options...
94retta(219) Posted March 26, 2011 Report Share Posted March 26, 2011 Cut your length, hight, and width in half and make a 4 cube sealed box then smash yuur lil heart out. Easy as pie. Quote BUILD LOG Link to comment Share on other sites More sharing options...
94retta(219) Posted March 26, 2011 Report Share Posted March 26, 2011 Woooo wait, your wanting to put 400rms to a 250rms sub in recomended box? Quote BUILD LOG Link to comment Share on other sites More sharing options...
Hertz_dont_it Posted March 26, 2011 Author Report Share Posted March 26, 2011 Cut your length, hight, and width in half and make a 4 cube sealed box then smash yuur lil heart out. Easy as pie. ok im lost, i tink ill have someone make me a box at one of te shops around here or something cause i aint got a clue Quote Current system:Front stage: Alpine type s 6.5No rear:Alpine type s 6.5headunit: alpineAmp: Jbl bp600.1 Sub: Alpine type x 12 dont know much about them. Found a "FLUX" Capacitor on ebay. If I add this to my system, can I really travel into the future? And how far into the future? That probably all depends on how I ground it though, right?Dude dont even waste your money on capacitors get a second car battery preferably a kinetik or stinger or any other car audio battery use the battery that is correct for your systems true rms wattage do some research on the net for this. Go to kinetiks website they explain how to pick a battery from thier site that fits your system. Link to comment Share on other sites More sharing options...
Hertz_dont_it Posted March 26, 2011 Author Report Share Posted March 26, 2011 Woooo wait, your wanting to put 400rms to a 250rms sub in recomended box? noooooo im getting 1 600w amp for each 2 subs: 600w of amp for 800w of sub amp runs 300rms at 2 ohm and 200 rms at 4ohm te sub is recomended for have anywhere from 100-200w rms Quote Current system:Front stage: Alpine type s 6.5No rear:Alpine type s 6.5headunit: alpineAmp: Jbl bp600.1 Sub: Alpine type x 12 dont know much about them. Found a "FLUX" Capacitor on ebay. If I add this to my system, can I really travel into the future? And how far into the future? That probably all depends on how I ground it though, right?Dude dont even waste your money on capacitors get a second car battery preferably a kinetik or stinger or any other car audio battery use the battery that is correct for your systems true rms wattage do some research on the net for this. Go to kinetiks website they explain how to pick a battery from thier site that fits your system. Link to comment Share on other sites More sharing options...
94retta(219) Posted March 26, 2011 Report Share Posted March 26, 2011 And how do you plan to set your gains? Quote BUILD LOG Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.