pknubsalday Posted March 29, 2011 Report Share Posted March 29, 2011 (edited) ok so im running a hifonicz brz1200.1 amp and a 18" subwoofer on stock electrical with a added bat/cap and i think its time to do the big 3, i had a look under my hood and i was like wtf where do i connect the 0 gauge from the bat.. anyway would you pro's help me a out a little so this is the stock i will also change the terminals thats the alternator there and this is where the wires are going i dont know what that is? is that a ground or something Edited March 29, 2011 by pknubsalday Quote my ride and audio build log - http://www.stevemeadedesigns.com/board/topic/99050-my-new-re-audio-sx-18-with-build-pics/ Link to comment Share on other sites More sharing options...
pknubsalday Posted March 29, 2011 Author Report Share Posted March 29, 2011 heres some more pics of the setup i think thats the bat ground there (not sure) Quote my ride and audio build log - http://www.stevemeadedesigns.com/board/topic/99050-my-new-re-audio-sx-18-with-build-pics/ Link to comment Share on other sites More sharing options...
Ricky A. Posted March 29, 2011 Report Share Posted March 29, 2011 it might be a connector on the back of the alt. thats how mine was.. and it might be a ground mine looked similar. break out the ohm meter! (300th) post Quote BUILD LINK: http://www.stevemeadedesigns.com/board/topic/112034-2-sundown-18s-98-f-150/page__p__1565972__fromsearch__1#entry156597298 Ford F-150Truck:37" superswamper tsl radials16" ion alloy wheels3" body lift2" suspension liftOffbrand brushguardPIAA driving lights6000K HID'sSystem:2 18" Sundown NightshaedAq3500Custom Fiberglass boxfosgate T1 6x8 Coxialsbass inferno 2000 watt 4 channel2 XS power d3100's0 Gauge Link to comment Share on other sites More sharing options...
wolfpack Posted March 29, 2011 Report Share Posted March 29, 2011 some vehicles have a separate ground on the alt. just find your charging post. if your alt has a few different posts just use a dmm to find the charging post. Quote 2010 Subaru Impreza Pioneer AVH-P1400DVD 2 10" Rockford Fosgate Punch HX2 Audison LRx 1.1K superglue a dildo to the center of the cone....lube it.....then have that dumbass sit on it while playing a 10hz note haha, this reminds me of a paintball sticker i have "my balls slap at 300fps" now I want a sticker that says "i fuck at 10hz" Link to comment Share on other sites More sharing options...
pknubsalday Posted March 29, 2011 Author Report Share Posted March 29, 2011 some vehicles have a separate ground on the alt. just find your charging post. if your alt has a few different posts just use a dmm to find the charging post. if it is a seperate ground should i use 0 gauge for it?? Quote my ride and audio build log - http://www.stevemeadedesigns.com/board/topic/99050-my-new-re-audio-sx-18-with-build-pics/ Link to comment Share on other sites More sharing options...
Amerrricuh Posted March 29, 2011 Report Share Posted March 29, 2011 thread jack, but is it ok to do a big 3 on a stock alt? someone told me stock alts have pre set ground and power wires and its not ok to change them unless you buy a h/o alt. is that true? personally i think its bs Quote (UNDER CONSTRUCTION) Kenwood KIV-700 headunit 2 18" sundown Z.v3s 13.5^3 wall tuned @ 28hz SAZ-3500 DC power 270amp alt JL c2 650 AP600.4 XS 1200 under the hood XS 3100 in the trunk 1/0 gauge big 3 25^2ft audio technix ^^ c-fuzzy ur an idiot, my 15" soround is waay bigger cuz its a tall sorround, on top of that I HAVE A BIGGER MOTOR... oh yeah and fuck u suck my dick i got your hoes! anywhere they want to. They cant hear anyone telling them otherwise. just because its bigger doesnt make it any different. they just piss people off faster and farther away. Link to comment Share on other sites More sharing options...
pknubsalday Posted March 29, 2011 Author Report Share Posted March 29, 2011 thread jack, but is it ok to do a big 3 on a stock alt? someone told me stock alts have pre set ground and power wires and its not ok to change them unless you buy a h/o alt. is that true? personally i think its bs i dont think it is true.. Quote my ride and audio build log - http://www.stevemeadedesigns.com/board/topic/99050-my-new-re-audio-sx-18-with-build-pics/ Link to comment Share on other sites More sharing options...
wolfpack Posted March 29, 2011 Report Share Posted March 29, 2011 some vehicles have a separate ground on the alt. just find your charging post. if your alt has a few different posts just use a dmm to find the charging post. if it is a seperate ground should i use 0 gauge for it?? it wouldn't hurt and sometimes it's necessary. Quote 2010 Subaru Impreza Pioneer AVH-P1400DVD 2 10" Rockford Fosgate Punch HX2 Audison LRx 1.1K superglue a dildo to the center of the cone....lube it.....then have that dumbass sit on it while playing a 10hz note haha, this reminds me of a paintball sticker i have "my balls slap at 300fps" now I want a sticker that says "i fuck at 10hz" Link to comment Share on other sites More sharing options...
wolfpack Posted March 29, 2011 Report Share Posted March 29, 2011 thread jack, but is it ok to do a big 3 on a stock alt? someone told me stock alts have pre set ground and power wires and its not ok to change them unless you buy a h/o alt. is that true? personally i think its bs ive done it many times with no problems, some vehicles you have to leave the stock charging wire on. my friends 98 durango charging wire ties into his starter wire so we just added 1/0 to it with 1/0 grounds. it may make your lights dim worse cus after doing the big 3 the wires are no longer restricted so it allows more power to flow through. Quote 2010 Subaru Impreza Pioneer AVH-P1400DVD 2 10" Rockford Fosgate Punch HX2 Audison LRx 1.1K superglue a dildo to the center of the cone....lube it.....then have that dumbass sit on it while playing a 10hz note haha, this reminds me of a paintball sticker i have "my balls slap at 300fps" now I want a sticker that says "i fuck at 10hz" Link to comment Share on other sites More sharing options...
pknubsalday Posted March 29, 2011 Author Report Share Posted March 29, 2011 also with the neg i dont see a ground for the engine block Quote my ride and audio build log - http://www.stevemeadedesigns.com/board/topic/99050-my-new-re-audio-sx-18-with-build-pics/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.