Exerstine Posted April 3, 2011 Report Posted April 3, 2011 Well ive had this car for awhile and a system in it, and i had never posted it. but i think its about time i did. but i am planning on a rebuild sometime.. but idk what i should do.. :/ Anyways heres pix of the car! Quote
Exerstine Posted April 3, 2011 Author Report Posted April 3, 2011 Picked up some stuff the other day, i did a few favors for a stereo shop owner and he decided that he wanted to thank me with these 2 sets of these. And these Quote
Dylank811 Posted April 3, 2011 Report Posted April 3, 2011 Oh nice hookup! Quote 2004 Ford Mustang GTPioneer DEH-P7200HD head unitMach 460 Factory System Cadence FXA1600.2 Cadence S2W10 Cadence 4 AWG wiring Ported box, 2 cubes, 32 hertz
STEvil Posted April 3, 2011 Report Posted April 3, 2011 put your sub where your amp is facing backwards (towards glass hatch), it will probably be louder. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
Exerstine Posted April 3, 2011 Author Report Posted April 3, 2011 And earlier today i found out that there was no way i could fit those speakers in the rear factory location. so i decided that this was a better way to go about it. its just a mock-up but idk what ill be doing to it.. itll be where the amp is but against the back seat.. Quote
Exerstine Posted April 3, 2011 Author Report Posted April 3, 2011 put your sub where your amp is facing backwards (towards glass hatch), it will probably be louder. it probably would, but i would like to be able to see out the back window lol Quote
STEvil Posted April 3, 2011 Report Posted April 3, 2011 I had a 12" in a truck box (sealed, layed on its back instead of standing up) in that position in my old 85 camaro and it pounded extremely hard.. kind of miss that setup lol. Set the box up there and test, if it works you can throw together a low profile box that could have the speakers and sub on it. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
Exerstine Posted April 3, 2011 Author Report Posted April 3, 2011 I had a 12" in a truck box (sealed, layed on its back instead of standing up) in that position in my old 85 camaro and it pounded extremely hard.. kind of miss that setup lol. Set the box up there and test, if it works you can throw together a low profile box that could have the speakers and sub on it. ill try it out but my box isnt sealed either its a port Quote
STEvil Posted April 3, 2011 Report Posted April 3, 2011 (edited) I had a 12" in a truck box (sealed, layed on its back instead of standing up) in that position in my old 85 camaro and it pounded extremely hard.. kind of miss that setup lol. Set the box up there and test, if it works you can throw together a low profile box that could have the speakers and sub on it. ill try it out but my box isnt sealed either its a port yeah I saw that. port facing rear might act kind of like an suv and get you some awesome output ; ) Edited April 3, 2011 by STEvil Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
Exerstine Posted April 3, 2011 Author Report Posted April 3, 2011 I had a 12" in a truck box (sealed, layed on its back instead of standing up) in that position in my old 85 camaro and it pounded extremely hard.. kind of miss that setup lol. Set the box up there and test, if it works you can throw together a low profile box that could have the speakers and sub on it. ill try it out but my box isnt sealed either its a port yeah I saw that. port facing rear might act kind of like an suv and get you some awesome output ; ) ill try that out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.