burp box

[mattp]

your pissing in the wind if you don't know where your truck peaks.

Build a sealed box and play some tones.

dont have mic. that i can use. but i think its around 47

[mattp]

your pissing in the wind if you don't know where your truck peaks.

Build a sealed box and play some tones.

so how would i do that, cant can I,with out a mic.

Edited April 10, 2011 by mattp

[fecupe2001]

It´s a big ass SUV, i would say your peak should be right around 48-50 hz at the most, i dunno about your tahoe but my explorer HATES anything tuned past the 41 hz mark, if i were you, i would tune the box no more than 41 hz , subs up/port back it´s a proven kick ass box for SUV´s.

I would shoot for around 160 SQ of port and 14-15" long , that would give you around 41 hz tuning and maybe 4.7 c/f per sub, that´s one big ass box for burps if you ask me, but if you already built it then just try it

[mattp]

It´s a big ass SUV, i would say your peak should be right around 48-50 hz at the most, i dunno about your tahoe but my explorer HATES anything tuned past the 41 hz mark, if i were you, i would tune the box no more than 41 hz , subs up/port back it´s a proven kick ass box for SUV´s.

I would shoot for around 160 SQ of port and 14-15" long , that would give you around 41 hz tuning and maybe 4.7 c/f per sub, that´s one big ass box for burps if you ask me, but if you already built it then just try it

yes i do have the box built it just a old box just something to play with.

so what do you think I should do for the ports, should I do areo or slot. could still use some help with this.

If I was peaking at 48-50hz what do you think I should turn to?

Edited April 15, 2011 by mattp

[fecupe2001]

It´s a big ass SUV, i would say your peak should be right around 48-50 hz at the most, i dunno about your tahoe but my explorer HATES anything tuned past the 41 hz mark, if i were you, i would tune the box no more than 41 hz , subs up/port back it´s a proven kick ass box for SUV´s.

I would shoot for around 160 SQ of port and 14-15" long , that would give you around 41 hz tuning and maybe 4.7 c/f per sub, that´s one big ass box for burps if you ask me, but if you already built it then just try it

yes i do have the box built it just a old box just something to play with.

so what do you think I should do for the ports, should I do areo or slot. could still use some help with this.

If I was peaking at 48-50hz what do you think I should turn to?

I love Aeros, they work very nice, but there are cars that work better with slot, and if i remember correctly, the tahoe it´s louder with a big ass slot port on the center of the box!!!

I wouldn´t tune the box higher than 41 hz my friend, but that´s just me

[Kian]

AEROS FTMFW i'm using an 8" sewer pipe. with a 12" steel punched flare in and out. 51HZ do you have access to a termlab? cause your gonna need to find your cars resonate frequency. my box is only 1.6 cubes and its with a Fi BTL 15"

if you do have access to a termlab, you should buy clay or wood to mold in the box to use more cubes/take more volume out, bigger box is not always louder. Build the Box as bix as you can and shrink from there. i would start at 5 cubes

Also what kinda vehicle?

Edited April 15, 2011 by Kian

[mattp]

It's a 99 tahoe

The box I have is 48w x 20h x 21d

[mattp]

No I don't have access to a TL.

Would like to get one, or find some or close to DES Moines. Iowa with one

[mattp]

No I don't have access to a TL.

Would like to get one, or find some or close to DES Moines. Iowa with one

[fecupe2001]

It's a 99 tahoe

The box I have is 48w x 20h x 21d

Thickness of the wood?