rusty959 Posted August 22, 2012 Author Report Share Posted August 22, 2012 Time to make this part fit. Here was the first rough cut. Wedged it in to get a better idea of fitment After some measuring (largely before today) it looked like this hole was in the proper place. So, I planned to use it for my horizontal fitment. So, the goal was to force it to make a perfect circle Found an extender that fit almost perfectly to help A bunch of cutting and grinding and fitting later, came up with this. My horizontal fitment looked good, but woe on me for believing that hole was perfectly placed. Looks like its a bit off vertically when its actually put in place. Silly repro parts. Close enough. With this many gaps that needed cut perfectly and this being the furthest off one, im happy. Welding will fill it. Fit some pieces on to do some measurements to make sure everything will line up correctly in the end. 2013 Subaru BRZ12" Orion HCCA on AQ 22001967 mustang restoration project: http://www.stevemeadedesigns.com/board/topic/110765-mustang-restoration-build-2011-edition/ Youtube: https://www.youtube.com/user/therusty959 Link to comment Share on other sites More sharing options...
rusty959 Posted August 28, 2012 Author Report Share Posted August 28, 2012 Been quite the busy, but progress that I can show on pictures has been minimal. Been doing a lot of blasting, a lot of shaping, plenty of measuring, and a decent amount of welding. Not completely welded in, but all secure 2013 Subaru BRZ12" Orion HCCA on AQ 22001967 mustang restoration project: http://www.stevemeadedesigns.com/board/topic/110765-mustang-restoration-build-2011-edition/ Youtube: https://www.youtube.com/user/therusty959 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.