AlpineGuy87 Posted October 16, 2007 Author Report Share Posted October 16, 2007 thanks man, if anyone wants to come up with some designs, thats great!! I got plenty wood and well i'd rather have smallest box possible lol.. but uh, yea, designs designs designs, if you got any post em up!!! i need some ideas here!!! Its a 12" P3 06 SCION tC Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 17, 2007 Author Report Share Posted October 17, 2007 06 SCION tC Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 17, 2007 Author Report Share Posted October 17, 2007 I have the face board done if its usable.. if any box can be built according to these specks it will save me some time... lol this piece is 22 x 16 can anyone that knows how to determine space and port and junk tell me what other sizes i would need here... ? 06 SCION tC Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 17, 2007 Author Report Share Posted October 17, 2007 ok, so i got this design.... 22" x 16" x 12" is that good box size? what should i tune this box to with the 12" P3 and what size port will i need for that tuning? 06 SCION tC Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 17, 2007 Author Report Share Posted October 17, 2007 should i go with a smaller box?? 06 SCION tC Link to comment Share on other sites More sharing options...
IH8PunkRok Posted October 17, 2007 Report Share Posted October 17, 2007 nope thats a real good box size put a port in there and itll hit pretty good -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 18, 2007 Author Report Share Posted October 18, 2007 the port will be about 2 1/2" (width) 12" (length) 9" (depth).... well the wood for the port will be 9" so 9 3/4" for the port.. w/e i hate math lol Sounds good, I'll cut out this box prolly tomorrow i think! =D just hope i can do some straight lines with the jig! =D lol.. i'll sound out any imperfections with the sander! =D 06 SCION tC Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 18, 2007 Author Report Share Posted October 18, 2007 Got it all measured out and ready to be cut, then once i start getting it cut i'll start putting it together!! =D 06 SCION tC Link to comment Share on other sites More sharing options...
AlpineGuy87 Posted October 18, 2007 Author Report Share Posted October 18, 2007 QUESTION!!! If i'm running it off regular stereo system... how could i increase the power to it? like is there a small "amp" like piece of equipment i could get for cheap to boost the power. Also what should or could i use to eliminate all the high frequencies, so that only lows come out this sub? Looking for dirt cheap stuff lol.. so any help would be great!! 06 SCION tC Link to comment Share on other sites More sharing options...
IH8PunkRok Posted October 18, 2007 Report Share Posted October 18, 2007 unfortunately dirt cheap and home audio dont go together ur best bet is to find a plate amp however they can be fairly expensive especially if u wanna accurately power that sub and u need a crossover for that sub. never run high notes threw it! u will fry that sub quickly -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.