ehuber87 Posted June 7, 2011 Report Posted June 7, 2011 I just "upgraded" my speaker setup in my 92 Accord and was wondering if it would be worth using all 4 sets of speakers (olds and news) in the system, and if there was an effective way of wiring such a system from one 4-channel amplifier and head unit power. Existing setup: JL Audio TR650-CSi 6.5" components in front doors (in-phase crossover, lower end component) JL Audio TR690-TXi 6x9's in the rear deck New Speakers: JL Audio C3-650 6.5" convertible components for front doors (external crossover, finer tuning and range) JL Audio C2-690tx 6x9's for the rear deck (better mid-bass and power handling) The 4-channel in question is a JL Audio 300/4v2. The head unit is an Alpine cda-9887. Altogether, i have roughly 380 watts rms for the speakers using both the head units internal amp and the external 4-channel amplifier. My subs can be rather overbearing, so I was thinking adding some mid-range and highs' with more speakers would result in better sound. I also know that the more speakers you have, the more cancellation there can be. Any suggestions?
OldSchoolMagilla Posted June 9, 2011 Report Posted June 9, 2011 JL Audio C3-650 6.5" convertible components for front doors (external crossover, finer tuning and range) JL Audio C2-690tx 6x9's for the rear deck (better mid-bass and power handling) Replace mids and highs with new set that you listed! sale old ones and give them more power!
korey_hofer Posted June 9, 2011 Report Posted June 9, 2011 use the 2 6.5's sell the 6x9's and get an amp for them previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.