DeepHittersMagazine Posted October 24, 2007 Report Share Posted October 24, 2007 I want to wire (18) mids together on one amp that's 3000W 4 ohm A/B amp. All the mids are 8 ohm. How do I do it, I know it can be done but don't know exactly DeepHitters Website DeepHitters Facebook DeepHitters Youtube SuperBeast Youtube Link to comment Share on other sites More sharing options...
mrwigglezdj Posted October 24, 2007 Report Share Posted October 24, 2007 is it a one ch amp or two? Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
mrwigglezdj Posted October 24, 2007 Report Share Posted October 24, 2007 ok on paper i came up with each speaker =8 ohm each 3 speakers = 1.33 ohm 3 1.33 ohm loads = 3.99 ohms Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
mrwigglezdj Posted October 24, 2007 Report Share Posted October 24, 2007 ill do a picture if i need too , but thats what ive came up with hope it helps ya Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
DeepHittersMagazine Posted October 24, 2007 Author Report Share Posted October 24, 2007 ill do a picture if i need too , but thats what ive came up with hope it helps ya it's a two channel and any help would be great! DeepHitters Website DeepHitters Facebook DeepHitters Youtube SuperBeast Youtube Link to comment Share on other sites More sharing options...
mrwigglezdj Posted October 24, 2007 Report Share Posted October 24, 2007 so how do you want to run the amp?, all speakers at the amp bridged at 4ohms or 2 ohms or close to 2 ohms per chanle?makes a difference on the power output from the amp Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
DeepHittersMagazine Posted October 24, 2007 Author Report Share Posted October 24, 2007 so how do you want to run the amp?, all speakers at the amp bridged at 4ohms or 2 ohms or close to 2 ohms per chanle?makes a difference on the power output from the amp to get the full power out the amp 3000W mono @ 4ohm DeepHitters Website DeepHitters Facebook DeepHitters Youtube SuperBeast Youtube Link to comment Share on other sites More sharing options...
mrwigglezdj Posted October 24, 2007 Report Share Posted October 24, 2007 ok see if i can explaine well do 3 speakers per. so pos to pos and neg to neg of each of the 3 speakers will = 2.67 load per 3 you will do 6 sets of 3 speakers for 6 seperate 2.67 loads take 3 of the 6 sets (9 speakers) and with 3 wired up to 2.67 you will use neg from one speaker to the neg of the first of the next 3 and pos of the same to neg of the next speaker and do that untill you have all 3 sets wired up together for 8 ohms do that on the next plot of 9 speakers and have another 8 ohm load so now you have 2 8 ohm loads with 9 speakers per load combine them for a final load of 4 ohm mono to the amp like your asking for by takeing the last speaker from each load and connecting it to the other load by pos to pos and neg to neg i belive i have that rite...ill double check myself ina minute or if someone sees a issue let em know Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.