scooter99 Posted September 7, 2011 Report Share Posted September 7, 2011 Alright SMD family! So I've been up on the member build section for a while under 06 Civic Build - Performance and Audio and I know there are a lot of pictures that aren't up there. I started this thread very late in the build, but I've got almost all the pictures to date on my photo bucket site. I'm going to work on getting everything put up in sections. Bare with me cause there's over 1500 pictures in my PB account. Obviously that's gonna take a while to get all of them up.If you want to comment, ask a question, or just simply say YO WHAT UP! You're welcome to come on over to my build thread linked above, or also linked in my signature. Otherwise, sit back enjoy and I thank you for checking out my ride!Here's a list of the Performance Mods and Misc Mods done thus far. I'll do the list, and then go through some pictures of what's been done.MiscFlip Key Mod Done June 2, 2011Spenser Air Squash Air Freshener Done June 2, 2011 / Replaced August 20, 2011ExteriorDe-badged the Civic logo.SI trunk with wing - (Have - needs install and carbon fiber vinyl)OEM Fogs with Hella Projectors with 3000K Morimoto HID's - (Needs installed)Morimoto Mini H1 Projectors with 5000K Morimoto HID's Done October 26, 2011 OEM Sidemarkers - Tinted Done October 23, 2011Carbon Fiber Vinyl - Hood, Roof, Trunk, Wing (need vinyl)Si Grill carbon fiber vinyled - Done March 7, 2011HFP Lip Kit Carbon Fiber Vinyled - (Need)InteriorSeat Reupholstering (needed)Hybrid Racing Black Nickel Weighted Shift Knob Done March 8, 2011Reupholstered center console arm rest Done - Don't remember dateLed dome lights Done - Don't remember dateCarbon Fiber Vinyled Shift Boot Frame - Done March 20, 2011Reupholstered Shift Boot - Done March 20, 2011Engine/PerformanceScan Gauge II in a custom pod Done October 23, 2011Brand New OEM Shifter Cables - Done March 20, 2011TWM Performance Short Shifter Adaptor Done March 8, 2011Hybrid Racing Shifter Cable Bushings Done April 15, 2011Hybrid Racing Shifter Base Bushings Done March 8, 2011Hybrid Racing Radiator Hoses Done May 2, 2011Injen CAI - Black Done March 20, 2011P2R Throttle Body Spacer Done March 20, 2011NST Pulleys (Need)Weapon-R Engine Torque Damper (Need)Megan Racing Header Done April 14, 2011 / Removed April 22, 2011Megan Racing Downpipe Done June 29, 2011Weapon-R Angled O2 Sensor CEL Eliminator Done April 14, 2011 / Removed April 22, 2011Vibrant Catback Exhaust Done April 14, 2011 Welded center pipes together - Done June 20, 2011Vibrant Bottle Resonator (Bought, needs to be welded on)Flash Pro (Need)SuspensionBuddy Club N+ Coilovers Done September 02, 2010Buddy Club Rear Camber Arms Done September 02, 2010Ingalls Front Camber Bolts Done September 02, 2010Ingalls Front Camber Bolts (second set) Done 3/28/2011Si Rear Sway Bar Done June 29, 2011Hotchkis Endlinks (need)P2R Lower Tie Bar Done September 17, 2011Wheels and TiresRe-Rolled rear fenders and got rid of about 98% of the rubbing issues.Front fenders rolled Done September 17, 201Varrstoen ES 2.2.2 18x8 Matte Black Done February 13, 2011Falken Ziex ZE-912 - 215/35/18 Tires Done 11/30/2011Wilwood Brake Kit (black) (Way future.) Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 Flip Key Mod: What it was: What it turned into Pretty Basic! Don't have much of the air freshener, it's pretty self explanatory. De-badging and tinted tail lights: Morimoto Mini H1 Projectors with 5000K Morimoto HID's: Before with normal Halogen Bulbs, nokia yellow highs/drls and the OEM parking lights: Projectors with HID's, cleared parking lights with chrome bulbs, same Nokia Yellow highs/drls, and Audi Style LED's under headlights and LED's in the grill, as well as OEM Fog lights: Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 Daytime Shots: Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 The shrouds on those are custom made by me. Fiber glassed, body filled, and hours and hours of sanding might I add! Primed, and painted black with High Heat VHT Matte Black! Here are only a few pics of those, cause there's hundreds! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 For the OEM Sidemarkers, I had to make my own wire harnesses, cause I didn't want to buy some. These are them: Next I tinted them: Can't forget about my helper! You'll see her and my other daughter alot throughout the build! Still shines! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 Time to install! This was EXTREMELY nerve wracking! Really blends nicely! Wire em up! The wiring was cleaned up from this: Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 to this: Forgot to add the pic with the black heat shrink! Video: Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 Si Grill carbon fiber vinyled: Also Tinted the "Honda" logo: Hybrid Racing Black Nickel Weighted Shift Knob: Reupholstered center console arm rest Carbon Fiber Vinyled Shift Boot Frame and Reupholstered Shift Boot (this needs to be redone badly): Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted September 8, 2011 Author Report Share Posted September 8, 2011 Scan Gauge II in a custom pod: Made a frame of ABS Then, again, lots of sanding and filling! Covered it with carbon fiber vinyl Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
scooter99 Posted December 27, 2011 Author Report Share Posted December 27, 2011 TWM Performance Short Shifter Adaptor Hybrid Racing Shifter Cable Bushings Hybrid Racing Shifter Base Bushings Old on the left, new on the right Cable Bushings Shifter Bushings Hybrid Racing Radiator Hoses Injen CAI - Black Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.