BiggsVI Posted September 24, 2011 Report Posted September 24, 2011 (edited) Hey does anyone have a cut out guide for making 12 inch countersunk speaker rings using the Jasper 200 Circle jig with a 1/4 inch straight router bit. This is my first time attempting to make subwoofer rings. Here are the specs for the woofer I'm using. The overall diameter 12.03”, 305.5mm Baffle Hole Diameter 10.95”, 278.1mm Mounting Holes Diameter 0.25”, 6.4mm Mounting Holes B.C.D. 11.59”, 294.3mm Thanks in Advance. Edited September 24, 2011 by BiggsVI
deeje Posted September 24, 2011 Report Posted September 24, 2011 Jasper jig is the best rout. Possibly a plunge router --2004 Toyota 4runner New Build Log -2002 Acura Tl-S Old Build Log Team DC Audio spl dust is an option you can get on the coils... it's great for extra 1000 watts of power where can i get this spl dust and how much is it. is it hard to apply? lol
fritosaregood Posted September 24, 2011 Report Posted September 24, 2011 cut 2 rings to 13" diameters, cut one with a 10.95" hole and the other with a 12.03" hole (bigger if you want it to come out easier), then glue the pieces together. seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970
Recommended Posts