No0B Posted September 27, 2011 Report Posted September 27, 2011 (edited) Ok, so i am building a box for my level 4 dc 15" box is 4.11 and after speaker displacement and port displacement is 3.15ft^3 so I was wondering if doing what i did at the end...making the port opening 2 inches bigger would make my box higher tuned originally the pot is 3 inches wide Uploaded with ImageShack.us Edited September 27, 2011 by No0B Quote
CleanSierra Posted September 27, 2011 Report Posted September 27, 2011 Image no workie Quote Im not the one you want to try to troll. Just a fyi for you.
No0B Posted September 27, 2011 Author Report Posted September 27, 2011 Image no workie works now! Quote
jnizzle Posted September 27, 2011 Report Posted September 27, 2011 Is that a Kerf? and id say make it like 2 in. longer to avoid higher tuning, thats what i did on my box super similar to that. Quote
CleanSierra Posted September 27, 2011 Report Posted September 27, 2011 Is that a Kerf? and id say make it like 2 in. longer to avoid higher tuning, thats what i did on my box super similar to that. It's not a kerf, it's not rounded. I agree with 2 inches longer to keep tuning as close as possible. Without dimensions of the box though it's hard to give specifics. Quote Im not the one you want to try to troll. Just a fyi for you.
No0B Posted September 27, 2011 Author Report Posted September 27, 2011 Is that a Kerf? and id say make it like 2 in. longer to avoid higher tuning, thats what i did on my box super similar to that. what do you mean make it 2 inches longer like extend the port to the outside like this? Uploaded with ImageShack.us Quote
No0B Posted September 27, 2011 Author Report Posted September 27, 2011 Also i got dimensions just too lazy to do it on paint i tuned it with torrest calculator and its sitting at 35hz with 13.5 inches per sq. ft. Quote
CleanSierra Posted September 27, 2011 Report Posted September 27, 2011 Like two inches further on the total length of the port. So adding two inches to the piece that "L"s off inside the box, not outside the box. Quote Im not the one you want to try to troll. Just a fyi for you.
StrongmanDesigns Posted September 27, 2011 Report Posted September 27, 2011 no, 2" longer at the back of the port to make up for that angle. Quote
StrongmanDesigns Posted September 27, 2011 Report Posted September 27, 2011 Like two inches further on the total length of the port. So adding two inches to the piece that "L"s off inside the box, not outside the box. ^^^this Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.