ilovebass808 Posted October 22, 2011 Report Posted October 22, 2011 I've been wanting to drop my truck for awhile but I'm not sure what kits are good. So I thought I'd ask you guys. I think I wanna go with a 3/4 3 in the front and 4 in the back. Quote Check out my build! http://www.stevemeadedesigns.com/board/topic/129983-99-chevy-s10-build-log/
emtaym Posted February 7, 2012 Report Posted February 7, 2012 hi there, I am looking ( s10 lowering kit)for 3 inch drop spindles, 3 inch lowering coils, 4 inch lowering blocks, and shorter shocks for a first gen S10 2WD. thanks Quote
redrider Posted February 7, 2012 Report Posted February 7, 2012 personally i would go with either belltech or djm lowering components. if you have any plans in the future to bag the truck i would do 2" drop spindles as well as 2" drop springs up front with a 4" angled block in the rear.... give you a total of 4/4 all the way around. if you dont plan on bagging the truck then a good 3/4 drop by belltech or djm would do with a good drop shock. Quote audio setup HU: sony Amps: cadence csa5000.1(running at 1 ohm 1200w x 1) Subs: pair of cadence s2w8-s2 Doors: cadence zrs65k's component set Box: customed glassed box tuned @ 35 hz with one 4" port....built by me Underhood: powerbastards.com H/O 200 amp alt, big 3 upgrade(4 awg) and optima red top battery Wiring: SQ audio 0 awg amp kit Cadence Sponsored build http://www.stevemeadedesigns.com/board/topic/133648-96-s10-cadence-audio-build/page__hl__cadence
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.