traxxas101 Posted October 25, 2011 Report Posted October 25, 2011 Hey guys im installing my friends system right and i got everything hooked up and he wanted everything to be oem intergrated so i did and everything works when the car off.. Amp stays on and sounds good! When i start the car the amp start to go into protect and then out almost like its flickerin on and off.. WTF!!! Idk whys its doin this can you guy plz explain i checked the ground but not the positive lead yet so idk also i put a volt meter and its like 13.8 when the amp is off but when i turn it on it drops to about 12.6 then cuts on and off when the cars running.. Member the amp is at idle Plzz get back soon guys i need ur help! Quote
joemon Posted October 25, 2011 Report Posted October 25, 2011 Sounds like ur shorting out sumwhere. U have a power and ground touching. Check ur power lead wire and make sure its not cut or nothing Quote stevemeadedesigns.com/board/topic/105505-silvia-first-time-build-kenwood/
DRCinc Posted October 25, 2011 Report Posted October 25, 2011 Sounds like ur shorting out sumwhere. U have a power and ground touching. Check ur power lead wire and make sure its not cut or nothing ^ this Quote
traxxas101 Posted October 25, 2011 Author Report Posted October 25, 2011 Alright my buddy has to come over another day.. I jus dont get why the amp would run fine when the car is off but into an out of protect when its running.. Idk lol im gonna go crazy! Quote
traxxas101 Posted October 25, 2011 Author Report Posted October 25, 2011 Its goes in and out of protect at a pace to guys it like its does 2 cycles of on and off every second Quote
Guest Posted October 25, 2011 Report Posted October 25, 2011 make sure EVERY SINGLE connection is tight. every single one. also make sure that there are 0 frayed wires sticking out and make sure there are no pinched wires along any wire Quote
mikeg321 Posted October 26, 2011 Report Posted October 26, 2011 What did you use for the amps remote turn on? Quote 4 fully loaded Fi sp4 15's 2 Crescendo bc5500s Crescendo c1100.4 6 focal mids Vifa tweets 5 XS Power d3100's Pioneer avh-p4200dvd All crammed into a mustang. http://www.stevemeadedesigns.com/board/topic/150569-mikeg321s-fi-nendo-mustang-getting-walled-videos-page-4/
traxxas101 Posted October 26, 2011 Author Report Posted October 26, 2011 What did you use for the amps remote turn on? [/quote the ignition wire.. but that doesnt matter bc even if i make a jumper and use the + on the amp for my remote it still goes into protect! Quote
mikeg321 Posted October 26, 2011 Report Posted October 26, 2011 the ignition wire.. but that doesnt matter bc even if i make a jumper and use the + on the amp for my remote it still goes into protect! Damn I was thinking it had something to to do with your remote. I can't think of any thing else that would cause your problem. I hope you figure it out good luck Quote 4 fully loaded Fi sp4 15's 2 Crescendo bc5500s Crescendo c1100.4 6 focal mids Vifa tweets 5 XS Power d3100's Pioneer avh-p4200dvd All crammed into a mustang. http://www.stevemeadedesigns.com/board/topic/150569-mikeg321s-fi-nendo-mustang-getting-walled-videos-page-4/
poorfish88 Posted October 26, 2011 Report Posted October 26, 2011 Make sure the fuse is tight. Ive had cheap fuse holders mess things up. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.